Description:
-quantity of mold head:36-capacity:18000~22000pcs/hr
-Hydraulic
-550*350*220cm
[Specification]
Type | JF-30(16T) | JF-30(24T) | JF-30(36T) |
Capacity | 8000-10000pcs/hr | 12000-15000pcs/hr | 18000-22000pcs/hr |
Cap diameter | 20mm-60mm | 20mm-60mm | 20mm-60mm |
Cap height | 10mm-30mm | 10mm-30mm | 10mm-30mm |
Screw diameter | 50mm | 65mm | 65mm |
Power of heating ring of theextruder | 11KW | 11KW | 11KW |
Power of electromotor of theextruder | 4.5KW | 7.5KW | 7.5KW |
Quantity of moldhead | 16 | 24 | 36 |
Power of electromotor of themolding press machine | 1.1KW | 2.2KW | 2.2KW |
Power of hydraulicpressure | 7.5KW | 11KW | 11KW |
Power of coolingsystem | 3KW | 3KW | 3KW |
Air consumption | 6kgs, 0.5m3/hr | 6kgs, 0.5m3/hr | 6kgs, 0.5m3/hr |
Power, Voltage | 380V, 50HZ | 380V, 50HZ | 380V, 50HZ |
Weight | 2500kg | 3800kg | 5200kg |
Size | 2700×1100×2200mm | 3350×1450×2200mm | 5500×3500×2200mm |
The aboveconfiguration is only for your reference, particularconfiguration is confirmed according to customers'' actualneeds
[Advantage]
-Equipped withcomputer and automatic temperature control devices.It becomes moreaccurate.
-Easy operationand economy in electricity, water, raw material and laborpower.
-Moulds are easierto be assembled and disassembled.
-Caps made by thismachine is without injection point.Easy for printing.
-The products madeby this machine are much more uniform.Defective goods are less thanthe traditional machine’s product.
Themachine makes sodas and mineral water bottle caps from granularplastic raw material which is fed via the hopper, plasticized withhigh temperature, and then forms die block that is extruded fromthe discharge outlet of the extruder, cut with the cutting tray,uniformly distributed into each mold cavity and finally moldpressed.
Bottlecaps which are made by this machine are without injection piont,without runner waste material, high output, excellent quality andbeautiful appearance.
Thismachine is also equipped with automatic temperature control devicesand a speed matching system of the extruder and the molding machineare installed to optimize the temperature of molds and materials,which makes the machine durable andstable.
It is characterized by easyoperation and economy in electricity, water, raw material and laborpower, increases its output by three compared with traditionalinjection molding machine with the same power consumption. Itgreatly reduce the cost of making caps.
[step]
[Contact]
Alibaba trademanager: cn1000698509
Fax: 86-0576-84615997
phone: 86-0576-84615979
Mob: 86-18258652683
Contact: Lin Zhang
Website: http://cntzjf.en.alibaba.com/ http://www.jinfengmould.com
Add: No.11 Shangxian Road, North City West Industrial Zone,Huangyan, Taizhou, Zhejiang, China
Zip:318020
