Price:Negotiable

Send Inquiry

Description:

Automatic blowing bottle molding machine
1.Full automatic
2.High efficiency
3.Model: CM-A4
4.Production capacity: 3500BPH

Automatic blowing bottle moldingmachine

 

 image show

 

 

descrirtion

 CM-A4Full automatic blow molding machine is suitable for producing PETplastic containers and bottles in all shapes. It is widely used toproduce the carbonated bottle, mineral water, pesticide bottle oilbottle cosmetics, wide-mouth bottle and hot fill bottleetc.
Features of main body:
1). Stable performance with advancedPLC.
2). Automatic preform conveyer tosave human cost.
3). Preform self-rotation andinfrared pre-heater revolution assure the even distribution ofheat, which improve the bottle shaping rate, increase theproduction.
4). High adjusting performance toenable preheat the preforms perfectly by adjust the voltage controlarea in the PLC, which could adjust the temperature of the infraredlights in the pre-heater, and keep the proper temperature andhumidity invariable.
5). High safeties with securityautomatic-locking device in each mechanical action, which will makethe production into a perfect safe environment, in case of thebreakdown in certain procedure.
6). Introduce the FESTO air cylinderto avoid contamination and noise.
7). Satisfaction with differentatmospheric pressure for blowing and mechanical action by dividingthe blowing and action into three parts in the air pressure diagramof the machine.
8). Strong clamping force with highpressure and double crank links to lock the mould.
9). Two ways of operating: automaticand manual.
10). Safereliable and unique designof the position of valve to make the pneumatic diagram in themachine easier to understand.
11). Low costhigh efficiencyeasyoperation and maintenance etc, profited from the fully automatictechnological process.
12). Ideal cooling system make thefinished bottles without any flaws.
13). Easy for you to installtestand start up.
14). Low rejection rate: less than0.2 percent.

 

certificates:

 

factory andworkshop:

 

 

packings:

 

 

Technological data

Main part:
Pneumatic part	Valve	SMC
	Cylinder
Electric part	PLC	LG Mitsubishi
	Operating system	LG /HITECH
	Relay	OMRON
	Infrared thermometer	America raytek
Note	All of the electrical components adopts CEULCCC approved international advanced high-tech product.
Main parameter:
Model	KM-A4
Productivity	Depend on bottle design	3200-4000PCS/H
Product type	Body diameter	20mm-100mm
	Height	50mm-350mm
	Neck diameter	15mm-38mm
Mold	Cavity	4cavities
	Mold thick	240mm
	Mold	500*500mm
Main machine power	Electrical source power	380v 3Phase /220v 3Phase  50/60HZ
	Rated Power	49kw
	Really use power	14kw
Air source	LP air compressor	1.6m3/min 1.0MPa 1set (15KW)
	HP air compressor	1.0m3/min 3.0MPa 2sets (each set 11KW)
	Air dryer	2.0m3/min 3.0MPa 1set
Cooling water	Cooling water	15L/min
Size	L*W*H	1908*1858*1920mm
	Weight	3600kg
Auxiliary equipmentpreform unscrambler	L*W*H	2000*950*2480mm
	Weight	250kg
Resin available		PET

      Our company specializesin the manufacture of bottle blowing machines, plastic injectionmolding machines, PET preform and plastic products. Just tell mewhat plastic product you want to produce and I will help you choosethe best model for your needs. We believe that our competitiveprices high quality and excellent service will bring us bothbenefits. Choose us-choose the best! !