Description:
Blow Molding Machine1)Specially for 3 gallons and 5 gallons pure water container andlamp cover
2)diehead speciall for PC
PC 5 gallon Blow Molding Machine
1)Specially for 3 gallons and 5 gallons pure water container andlamp cover
2)diehead speciall for PC
Blow Molding Machine :
1)Speciallyfor 3 gallons and 5 gallons pure water container and lampcover
2)Electricsystem: Mitsubishi PLC from Japan and human-machineinterface
3)Hydraulicsystem : YUKEN hydraulic valves and pump fromJapan
4)Plastisizingsystem: Effective, energy-saved screw
5)Diehead specially designed for PC material
6)Extrudingsystem : Invertor and harden surface gear box
7)Clampingunit : Adopting linear slideway with precision up to umgrade
8)Parisoninjecting: Single hydraulic cylinder withoutnon-synchronization
9)Mouldchanging: Extruding cover can be adjusted up and down, diehead canbe moved by hydraulic, and mould changing is veryeasy
Packaging:wooden box
| Machine Type: TDB-25APC | ||
| Parameters | Unit | Specifications |
| Max. Product Volume | L | 25 |
| Production Capacity (Dry Cycle) | Pc/h | 600 mold |
| Screw Diameter | mm | 82 |
| Screw L/D Ratio | L/D | 38 |
| Outputof PC | Kg/h | 160(PC) |
| No. of Screw Heating Zone | Zone | 8 |
| Accumulator Capacity | L | 1.9 |
| Max. Die Head Diameter | mm | 150 |
| No. of Die Head Heating Zone | Zone | 4 |
| Max. Size of Mold (width*height) | mm | 550*650 |
| Mold Thickness Range | mm | 355-410 |
| Range of mold-open | mm | 350-780 |
| Clamping Force | KN | 215 |
| Max. Motor Driving Power (3φ) | Kw | 45 |
| Max. Heating Power (3φ) | Kw | 17 |
| Average Wastage (3φ) | Kw | 150 |
| Size of Machine (length*width*height) | m | 6.3*2.3*4.0 |
| Weight of Machine | T | 12 |
