Price:Negotiable

Send Inquiry

Description:

JYX-A2 is the fastest liner bottle blowing machine in mainland ofChina by now. It reaches around 4200BPH for 350ML bottle.        JYX-A2Automatic Blow Moulding Machine  Available picture: 
  Introduction: JYX-A2is the fastest liner bottle blowing machine in mainland of China bynow. It reaches around 4200BPH for 350ML bottle. Its baking tunnelis separated from the blow station so that time for mold opening isshortened with a result of speedy blowing and high output, damageto machine is lessened so as to keep reliable performance andprolong service life, as well as machine runs more smoothly andsteadily. JYX-A2automatic stretch blow molding machine is equipped with patentedpreform loading system, which consists of two manipulators:rectilineal manipulator and overturning manipulator. Therectilineal manipulator moves preform with neck up to the preformholder, after heating, the overturning manipulator grips heatedpreform and overturn 180 put preform to blow station with neckdown. After stretching and blowing, the bottle is taken off byoverturning manipulator. The specially designed preform loading& bottle discharging system avoid possible damage to preform& bottle during transportation. JYX-A2is controlled by PLC. The whole process from preform feeding tobottle discharging is completed automatically with advantages oflabor saving and no pollution. It consists of three mainparts: preform loading system, Heater channel & blowstation.  Finished PET bottle samples produced by HY-A2 asfollow:   Operation:Thestandard operation of JYX-A4 stretch blow molding machine includesfour steps as followStep 1.Put the preform into preform container and the conveyer will takethe preform to orientation units automatically.Step 2.Load the preform at neck up to preform holder, and then preform isconveyed into baking tunnel.Step 3.After heating, preform is conveyed into the blow station, thenclose the mold, stretch and blow under low pressure and highpressure, exhaust, open the mold.Step 4.The finished bottle is taken off by automatic dischargingsystem Features:A.Stable performance with advanced PLC.B.Conveying preforms automatically with conveyor.C.Strong penetrability and good and swift distribution of the heat byletting the bottles rotate by itself and revolute in the railssimultaneously in the infrared preheater.D. Highadjustability to enable the preheater to preheat preforms in shapesby adjusting the light tube and the length of the reflecting boardin the preheating area, and eternal temperature in the preheaterwith an automatic thermostatic apparatus.E. Highsafeties with security automatic-locking apparatus in eachmechanical action, which will make the procedures turn into a stateof safety in case of a breakdown in certain procedure.F.Nocontamination and low noise with the air cylinder to drive theaction instead of the oil pump.G.Satisfaction with different atmospheric pressure for blowing andmechanical action by dividing the blowing and action into threeparts in the air pressure diagram of the machine.H.Strong clamping force with high pressure and double crank links tolock the mold.I. Twoways of operating: automatic and manual.J.Safe, reliable, and unique design of the position of valve to makethe air pressure diagram of the machine easier tounderstand.K. Lowcost, high efficiency, easy operation, easy maintenance, etc, withautomatic technological process.L.Contamination is avoided for the bottle body.M.Ideal effect of the chilling with the chilling system.N. Easyinstallation and startingO. Lowrejection rate: less than 0.3percent. Technicalparameter:  

TYPE	ITEM	UNIT	JYX-A2 technical data
Container	Product material	/	PET
	Container volume	L	0.05-2.0
	Theoretic output	Psc/hr	2300
	Preform length	MM	50-220
	Max height of bottle	MM	320
Molding	Preform inner diameter	mm	15-60
	Bottle diameter	mm	35-110
	Max mold plate dimension (L × W)	mm	190 × 350
	Max mold thickness	mm	200
Air compressor	High pressure compressor	M3/Mpa	1.2/30 × 3set
	Locking force	KN	170
	Mold opening stroke (adjustable)	mm	200
	Low pressure compressor	M3/Mpa	2.0/10 × 1sets
	Air dryer	M3/Mpa	2.0/30 × 1sets
Main machine electricity	Power	KW	24
	Voltage / frequency	V/Hz	380/50
Machine size and weight	Main machine (L × W × H)	M	3.2. × 1.8 × 2.0
	Main machine weight	T	3.2
	Conveyor (L × W × H)	M	1.4×1.1×1.85
	Conveyor weight	T	0.4
	High pressure compressor (L × W × H)	Kg	1.90×0.75×1.50×1sets
	Low pressure compressor (L × W × H)	M	1.85×0.75×1.50
	High pressure air reservoir tank (D × H)	M	0.70×2.55
	Air dryer (L × W × H)	M	0.85×0.50×0.95
	Air filters	Kg	10×4pc
Cooling water: cooling water recycling systemcan be used with its power of 8~10 liter per minute and 2~3 kiloswater pressure
Total power: 51.9, high pressure air volume:(1m/min), low pressure air volume (1.2m/min)
Safety	Auto emergency alarm	Safety inter-locking device

 

More pictures for reference:

 

        Mould(2 cavity)                      Machineinside                      Controler

 

            Bottle in                       Circuit board                        Air tank

 

         Bottles                           Complete machine                  Mould(6 cavity)  

 

 

 

 

 

 

 
Welcoming your inquiry of the A2automatic blow moulding machine!
 Contact us fordetail quotation of the A2 automatic blow mouldingmachine!