Description:
1.Product capacity:30-300ml2.Output:15000-20000pcs/day
3.Usable material:PE, PP, TPU, PS, PC.
4.Service life:more than 15 year
Technical parameter :
Model | SZK-552YP2-1L |
Type | Hydraulic type |
Screw diameter | 55mm |
Station | Double |
head | Double |
Usable material | PE, PP, TPU, PS, PC |
Product capacity | 30-300ml |
Center distance | 100mm |
Open/clamp stroke | 140-340mm |
Max size of mould | 280mm×300mm×170mm |
Clamping force | 4.3T |
Extruding motor | 7.5-11KW |
Pump motor | 4KW |
Screw heating | 5.5KW |
Machine size(L×W×H) | 2.9m×1.8m×2.1m |
COMPonENT FOR THESTANDARD TYPE | |
Japan | MitisubishiComputer |
MitisubishiMMI | |
YUKENHydraulic | |
FujiContactor | |
Germany | PepperlFuchs Proximity Switch |
Rexroth Pneumatic Valve | |
Italy | ATOS ServoValve |
Afagomma OilPipe | |
England | HALLITESealtech |
Taiwan | INVT FrequencyInverter |
Airtac PneumaticCylinder | |
Advantages:
1.Low malfunction rate in first 5 years. Life span is over 15years.
2.With safety light curtain. Guarantee the safety of workers withoutinfluencing the auto-running of machine.
3.Equip stainless-steel-blowing tube. To avoid blowing tube can notcooling down which result from the rusting block up the waterpipe.
4.Equip thicker linear rolling guide with 65 mm guide rod for themould station moving. The machine has longer life span than thosewith 45-50mm guide rod which was used by otherfactories.
5.Auto-lubrication control system is a creative design which canrenew the lubrication oil. Pump out certain volume of lubricationoil to each point. Collecting the used oil for cleaning andenvironmental friendly, while lengthen the life span ofmachine.
6.Equip hydraulic oil accurately secondary filter systemwith detectorand indicator. Ensure the hydraulic oil is clean and guarantee thelong life span of hydraulic system.
7.Equip hydraulic oil accurately secondary filter systemwith detectorand indicator. Ensure the hydraulic oil is clean and guarantee thelong life span of hydraulic system.
8.Equipservo valve and high-precision electronic caliper for mould stationmoving, PQ closed-loop control. To make the action of mould stationmoving more stable and energy efficient
9.The construction of blowing tube carrier and mould station are morestable, which is able to resist the force from the blowing tubewithout hook.
10.Equip accumulation air compressor, water-oil-dust separating systemto make the pneumatic system more stable and long life.
11.Equip large hard-tooth faced redactor for extruding, which ensureenergy efficient and long life.
12.Thick, high quality chroming guide rod can ensure energy efficientand long life.
13.Fittings from digitalize producing ensure we can change it as longas it is the same one.




