Price:Negotiable

Send Inquiry

Description:

2 cavity plastic bottle molding machine
1.automatic
2.High efficiency
3.Model: CM-A4
4.Production capacity: 1800~2000bph

2 cavity plastic bottle moldingmachine

 

 

 

 

 

plastic bottle blowing machine -----imageshow plastic bottle blowing machine------descrirtion

 CM-A4 Fullautomatic blow molding machine is suitable for producing PETplastic containers and bottles in all shapes. It is widely used toproduce the carbonated bottle, mineral water, pesticide bottle oilbottle cosmetics, wide-mouth bottle and hot fill bottleetc.
Features of mainbody:
1). Stable performance withadvanced PLC.
2). Automatic preformconveyer to save human cost.
3). Preform self-rotationand infrared pre-heater revolution assure the even distribution ofheat, which improve the bottle shaping rate, increase theproduction.
4). High adjustingperformance to enable preheat the preforms perfectly by adjust thevoltage control area in the PLC, which could adjust the temperatureof the infrared lights in the pre-heater, and keep the propertemperature and humidity invariable.
5). High safeties withsecurity automatic-locking device in each mechanical action, whichwill make the production into a perfect safe environment, in caseof the breakdown in certain procedure.
6). Introduce the FESTO aircylinder to avoid contamination and noise.
7). Satisfaction withdifferent atmospheric pressure for blowing and mechanical action bydividing the blowing and action into three parts in the airpressure diagram of the machine.
8). Strong clamping forcewith high pressure and double crank links to lock themould.
9). Two ways of operating:automatic and manual.
10). Safereliable andunique design of the position of valve to make the pneumaticdiagram in the machine easier to understand.
11). Low costhighefficiencyeasy operation and maintenance etc, profited from thefully automatic technological process.
12). Ideal cooling systemmake the finished bottles without any flaws.
13). Easy for you toinstalltest and start up.
14). Low rejection rate:less than 0.2 percent.

plastic bottle blowing machine ------factory

 

plastic bottle blowing machine ------working

plastic bottle blowing machine ------certificate

Main part:
Pneumatic part	Valve	SMC
	Cylinder
Electric part	PLC	LG Mitsubishi
	Operating system	LG /HITECH
	Relay	OMRON
	Infrared thermometer	America raytek
Note	All of the electrical components adopts CEULCCC approved international advanced high-tech product.
Main parameter:
Model	KM-A4
Productivity	Depend on bottle design	3200-4000PCS/H
Product type	Body diameter	20mm-100mm
	Height	50mm-350mm
	Neck diameter	15mm-38mm
Mold	Cavity	4cavities
	Mold thick	240mm
	Mold	500*500mm
Main machine power	Electrical source power	380v 3Phase /220v 3Phase  50/60HZ
	Rated Power	49kw
	Really use power	14kw
Air source	LP air compressor	1.6m3/min 1.0MPa 1set (15KW)
	HP air compressor	1.0m3/min 3.0MPa 2sets (each set 11KW)
	Air dryer	2.0m3/min 3.0MPa 1set
Cooling water	Cooling water	15L/min
Size	L*W*H	1908*1858*1920mm
	Weight	3600kg
Auxiliary equipmentpreform unscrambler	L*W*H	2000*950*2480mm
	Weight	250kg
Resin available		PET

      Our company specializesin the manufacture of bottle blowing machines, plastic injectionmolding machines, PET preform and plastic products. Just tell mewhat plastic product you want to produce and I will help you choosethe best model for your needs. We believe that our competitiveprices high quality and excellent service will bring us bothbenefits. Choose us-choose the best! !