Send Inquiry
Description:
1. WE OFFER ELECTRO PERMANENT MAGNET CHUCK2. IT IS SUITABLE FOR HEAVY MILLING OPERATION.
1. ELECTROPERMANENT MAGNET CHUCK ( Model - AA -502 )
For HeavyDuty Milling Operation.
ElectropermMagnetic Chucks ensure higher magnetic and mechanical performances,as well as absolute reliability, when compared with conventionalchucks. Electriperm Magnetic Chuck is "COLD" device, not subject tointernal wear or deformation resulting from moving internal parts.Our Electroperm Magnetic Chucks do not consume electrical powerexcept for the very short period of activation or deactivation ofthe working surface.
once fixed to the machine tableElectroperm Magnetic Chucks will be geomertrically stable as thetable itself.Electroperm Magntic Chucks are economical foroperation and maintanace. Electroperm Magnetic Chucks Producemagnetic clamping system for the Most Powerfull Machine toolsavailable. Systems are switched ON or OFF with simple electricalpulse. Electroperm Magnetic Chucks are entirely independent ofexternal power supply when holding work pieces. There is no risk,when power fails. The de-magnetization cycle of Electoperm Magneticchuck eliminates possible residual magnetism in the workpiece,therefore easy release for high alloy steel parats. They aredesigned for heavy operation such as milling cut of 3 to 6 mm depthat recommended speed & feed. ELECTROPERMLIGHT DUTY CHUCK (47 x 47 QuardPole)
Work holding device for Milling machines.
COLD DEVICE as it doesn''t require power continuously except forshort period of activation & deactivation.
Suitable for light milling i.e. 1-3 mm depth of cut at recommendedspeed & feed.
Maximum material removal is possible.
Economical for operation & maintenance.
No accidents due to power failure.
Slippering force is 2.5 - 3 Kg/cm².
Vertical Lifting Force is 35 - 40 Kg/cm².
Variable supply unit to vary power which helps in alignment ofjobs.
Chuck is tested for Slippering force, Waterproof test, Temperaturerise test, Electrical & Demagnetizing tests.
Good quality & standard electrical accessories.
We also manufacture Special chucks to suit individualrequirement.
| Sr.No. | CatNo. | Size(mm) |
| 1. | UL71801 | 600 L x300 W x 110H |
| 2. | UL-71802 | 750 Lx 300 W x 110H |
| 3. | UL- 71803 | 1000 Lx 300 W x110H |
| 4. | UL- 71804 | 1500 Lx 300 W x 110H |
| 5. | UL- 71805 | 600 Lx 400 W x 110H |
| 6. | UL-71806 | 750 Lx 400 W x 110H |
| 7. | UL -71807 | 1000 Lx 400 W x 110H |
| 8. | UL-71808 | 1500 Lx 400 W x 110H |
| 9. | ULTRA ConTROL UNIT WITHVARIABLE SUPPLY | |
ELECTROPERMHEAVY DUTY CHUCK (70 x 70) QuardPole
Work holding device for conventional & CNC millingm/c.
COLD DEVICE as it doesn''t require power continuously except forshort period of activation & deactivation.
Suitable for light milling i.e. 3-6 mm depth of cut at recommendedspeed & feed.
Maximum material removal is possible.
Economical for operation & maintenance.
No accidents due to power failure.
Slippering force is 2.5 - 3.5 Kg/cm².
Vertical Lifting Force is 40 - 45 Kg/cm².
Variable supply unit to vary power which helps in alignment ofjobs.
Chuck is tested for Slippering force, Waterproof test, Temperaturerise test, Electrical & Demagnetizing tests.
Good quality & standard electrical accessories.
We also manufacture Special chucks to suit individualrequirement
| Sr.No. | CatNo. | Size(mm) |
| 1. | UL71901 | 600 L x300 W x 110H |
| 2. | UL-71902 | 750 Lx 300 W x 110H |
| 3. | UL- 71903 | 1000 Lx 300 W x110H |
| 4. | UL- 71904 | 1500 Lx 300 W x 110H |
| 5. | UL- 71905 | 600 Lx 400 W x 110H |
| 6. | UL-71906 | 750 Lx 400 W x 110H |
| 7. | UL -71907 | 1000 Lx 400 W x 110H |
| 8. | UL-71908 | 1500 Lx 400 W x 110H |
| 9. | ULTRA ConTROL UNIT WITHVARIABLE SUPPLY | |
