Description:
Pharma Machinery Comminuting Mill Machine1. Fine Particle Size Reduction - up to 160 Mesh
2. Out Put-600 Kgs./ Hour
3. GMP.
Pharma MachineryComminuting Mill Machine
COMMINUTINGMill
APPLICATION
Pharma MachineComminuting Mill Machine is One of the most popular andsuccessful application of the comminuting mill machine Is in thepreparation of the wet & dry granulations used in the tabletmaking and in chemical, Bulk Drugs & food industry forgranulation & pulverization purpose. For this purposecomminuting mill machine with suitable blades is most suitableone.
Comminuting Mill Regarding the screen & speed, a very good combination ordeal depend upon the characteristic of the material & itscontent of moisture & of course the binder usedalso.
SALIENTFEATURES
- GMP point of viewmachine is provided with S.S. Cladding on base, S.S. beltguards, S. S. cover on motor. No exposed painted surface on top ofthe machine. Motor rails, screws and guide rods are chromeplated.
- Beaters assemblybearings are in separate pillow blocks for ease inmaintenance.
- Very less down time asonly beaters assembly will have to be revised (and not the completechamber) for making it knife to impact forward or vice-versawhich can be done by single operator.
- Beaters and shaft are ofstainless steel 316 quality.
- Transmission of heat tothe chamber from the bearings is minimum as they are away inseparate pillow blocks. This facilitates to some extent inprocessing of heat sensitive products.
- Beaters assembly isdynamically balanced which reduces vibration and noise level andincreases bearings life.
- Castors provided formobility and breaks can be applied for fixing machine at oneplace.
- Machine is alsoavailable in water jacketed model. Flame proof electrical can beprovided on demand at extra cost.
Model No. -Communiting | Mini | SPPROD | SPADV | SPMINI |
MaximumOut Put /Hour–In Kgs. | 10-100 | 50 -800
| 50 –800
| 400
|
No OfBeater | 6 | 16 Nos. | 16 Nos. | 8 Nos. |
Speed OfRotor | 1000 / 2250 /4500RPM | |||
Motor | 2 | 7.5 HPMotor | 2 HP | |
Feed Screw(Optinal) | N.A. | 0.5 HP | N.A. | |
Feed ScrewSpeed | N.A. | 2 to 60RPM | N.A. | |
ElectricalUtility |
| 415 V, 50 HZ, 3 Ph4 Wire | ||
Starter | Star-Delta, NoLoad & Over Load Protector | |||
OptionalFeatures | Fluid Jacketing /FLP / Dust Free Machine | |||
..




