Specifications:

• Slow Juicer with Crusher/cold press crishing juicer 1. Highcapacity 2. Factory price 3.CE

Description:

  SlowJuicer with Crusher/cold press crishing juicer

 

1.Machine introduction:

 

The unit issuitable for all kinds of berry,kernel fruitandand vegetables, crush and juice at the same time, also can do theother larger fruit and vegetables cooked to soften for juicing.(tomato juice yield reached 45% ~ 45%).

 

Nameprincipal:

 

P   ZJ -1.5              Spiral juice machine with Crusher

 

                                 Capacity     1.5T

 

                                 Spiral juicing

 

                                 Crush

 

Workingprinciple:

 

The maincomponent of this equipment is the hopper installed on the crushingplant. There are four groups of fly knife on the rotor, a groupdead knife. Fly knife around its own axis in the bottom of astationary knife gap in rotation. So that fruits and vegetables getbroken particle size 2-5 mm,directly intothe spiral juicing system,inorder to improve the juice result. Then do screw spiraljuicing,Spiral pathalong the bottom slag is expected to export direction graduallyincrease and screw Distance gradually reduce. When the material isspiral propulsion, for spiral cavity volume shrinking, form formaterial crushing. Screw spindle rotation direction from the feedhopper to slag trough direction, as the clockwisedirection.

 

Raw materialadded to the feed hopper,under thepropulsion of screw press,thesqueezing the juice through the filter into the bottom of the juicemachine,Waste isexpelled through screw and annular gap formed between the conicalpart ,Regulating headalong the axial movement cam adjust the gap size.Changethe size of the gap,canchange slag yield.

 

 

 

 

 

The structure diagram     

                  

 

1, Crusher boday

 

2, Broken shaft

 

3, Fracture of thestator

 

4, feed hopper

 

5, Crush rotor

 

6, side cover

 

7, Crush sword

 

8, Spiral juicemachine

 

Installationoperation and maintenance

 

1. The machinemust be installed level, and the ground screw fixation.

 

2. When thedevice is started,should adjustthe largest head make the annular gap,Thengap decreases,After reachingthe technological requirements, with a fixed wheel brake bearingseat position.

 

3,Feedmust be uniform,Itis forbidden to hard foreign body into the hopper, so as not todamage the screen.

 

4,After each classjob must wash with water and brush filter. If the fiber is morefine filtration of fruit juice,Mustbe according to the condition of production, increase a washbetween network, squeezed the after all with hot water washingmachine.

 

5,Replacedperiodically loaded with embellish clean grease, bearing normaltemperature less than 75 °C

 

Application andusage:

 

Use to squeezevegetables, celery, spinach, tomato, pineapple, pear, apple andorange and other fruit and vegetable juices.

 

2.Technical parameters:

Model	CapacityT/h	PowerKw	Sizemm
PZJ-0.5	0.5	1.5	900×350×1100
PZJ-1.5	1.5	5.5	1500×450×1640
PZJ-2.5	2.5	11	1600×700×1760