Description:
LHY ribbon mixer machine: 1)powder-liquid additive ribbon machine2)high efficiency ribbon machine 3)SS/MS ribbon machineLHYdetergent powder mixermachine:
video: www.1985blender.com/videoLHY2.html
1,Application:
In the U-shaped container, there arepositive and negative ribbons. Special proportion of the tworibbons can be rectified with the kind of material, quantity andthe proportion of body. This mixer has good effect on mixingviscosity or cohesion powder.
2,Characteristic:
a, Fast mixing speedcan satisfy the rigorous demand of mixing the materials withdifferent. physical property.
b, The rotation is under criticalspeed, which will reduce the effect of fragmentation to thematerial(e.g. crystal particle).
c, Lower height of the container isconvenient for installation.
d, The positive and negative ribbonsare set up at he same level, forming a mixing environment of lowpower but high efficiency.
3, WorkingPrinciple of mixer machine:
a, The horizontal axes makethe materials move up and down.
b, The outer ribbon gatheringthe material from sides to center and the inner ribbon pushing thematerial from center to sides.
c, Every screw makes the materialsdo axial and radial movement, the materials do relative cyclicalmovement so to gain the intensive mixings ends.
4, Specification of mixermachine:
| Type(m3) | Power(kw) | Rotate Speed(R/min) | (kg)(m3)/Batch | Dimension(mm) | Weight |
| LHY-0.3 | 3 | 41 | <240 | 2300×680×1060 | 750 |
| LHY-0.5 | 5.5 | 41 | <400 | 2900×780×1240 | 1000 |
| LHY-1 | 11 | 33 | <800 | 3200×1000×1400 | 1800 |
| LHY-2 | 15 | 33 | <1600 | 3860×1200×1650 | 2200 |
| LHY-3 | 18.5 | 33 | <2400 | 4320×1300×1900 | 3200 |
| LHY-4 | 22 | 28 | <3200 | 4600×1400×2000 | 4000 |
| LHY-5 | 37 | 28 | <4000 | 4850×1500×2020 | 4650 |
| LHY-6 | 37 | 22 | <4800 | 5400×1560×2200 | 6280 |
| LHY-8 | 45 | 22 | <6400 | 5100×1720×2420 | 8500 |
| LHY-10 | 55 | 19 | <8000 | 5610×1750×2360 | 9300 |
| LHY-15 | 90 | 17 | <12000 | 5820×2000×2900 | 11000 |
| LHY-20 | 110 | 11 | <16000 | 6060×2630×3160 | 13500 |
5,Seal:
The mixing result and theclean after-mixing environment depend on the sealing property. Ourcompany provides various sealing devices according to difference ofmaterials. The normal sealing structure is stuff seal and alsocalled TEFLON seal. After using for a period, user(s) should fastenand enhance it. However, the dynamic seal has a long-time sealingeffect and is especially fit for the powder, liquid.
6, Feeding inlet on the bodycover:
Two types:
a, used in the whole mixing/blending process: in order to connect the feeding device, we designthe connecting mouth.
b, used in the manual feeding: inorder to operate and clean inside of the body, we design feedinginlet(s) or door(s).
7, Discharging ofmixer machine:
There is a discharging valve atthe bottom of mixer body. When mixing different types of materials,we use flat discharging valve.
The operation of the dischargingvalve should be convenient and there are three types: manual, airdriven and electricity driven.
The manual discharging isoperated on the valve and the open extent is controlled by handfreely.
The air driven discharging valve,assembled with cylinder, work under the air pressure.
The electricity drivendischarging valve works under control of electricity controlbox.
8, Temperature control ofmixer machine:
We can use a jacket when heating,cooling or heat-preservation is needed.
The jacket is filled bycirculation and heat conduction medium and can not bear highpressure. There are two kinds of heat conduction medium: water andoil. The water temperature should be limited in 90 and theoil temperature should be limited in 300. The jacketcoordinates the external heating system, the expulsion system, thepipeline to carry on to the material continues and even temperatureprocessing.
