Description:
1). Moisture resistant2). Breathable, X-ray translucent
3). Excellent flexibility and compactibility
4). Lightweight, strong
Orthopedic CastingTape
Orthopediccasting tape is composed by manifold layers of special madefiberglass, which was soaked by polyurethane. Polyurethane materialis one kind of block copolymer which contains soft segment and itis characterize by better viscosity, fast drying time, highrigidness and light weight. Dure to better biocompatibility,polyurethane is widely used in medical fields. Animal study andacute and chronic toxicity test have proved that medicalpolyurethane is non-toxic and no teratogenecity, no localirritation and no anaphylactic reaction.
Character& advantage
1) Simpleoperation: Room temperature operation, short time, good moldingfeature
2) Highhardness & light weight
20 times hardthan plaster bandage; light material and use less than plasterbandage;
Its weight is plasters 1/5 and its width is plasters 1/3, whichcould reduce wound burden
3) lacunary(many holes structure) for excellent ventilation
Unique knitted net structure make sure good air ventilation andprevent skin damp and hot & pruritus.
4) Rapidossification (concretion)
It ossifies in 3-5 minutes after open the package and could bearweight after 20 minutes, but plaster bandage need 24 hours for fullconcretion
5) ExcellentX-ray penetration
Good x-raypenetration ability makes X-ray photo clearly without remove thebandage, but plaster bandage need remove to make x-rayinspection.
6) Goodwaterproofing quality
The moisture -absorbed percent is 85% less than plaster bandage,Even the patient touch the water situation, it still could keep dryin the injury position
7) Convenientoperation & mold easily.
8)Comfortable & safe to patient/doctor
Material is friendly to operator and it wont become tension afterconcretion.
9) Wideapplication
10)Environment friendly
Material are environmental friendly, which could not producepolluted gas after inflammation.
How to use castingtape:
1) Put thepad (cotton coil or cotton slipcover) on the surgeryposition.
2) Wearsurgical gloves.
3) Selectproper specification according to the surgery position.
4) Immersethe roll in room temperature water(21-24°C) for 4-6 seconds andsqueeze it 2-3 times firmly. If the water warmer than 21-24°Cshortens the immersing time, while cooler than 21-24°C waterlengthens the time.
5) Enwindspirally; Overlapping the previous layer by one-half or two-thirdsof the roll width. To maintain proper tension is very important andtake care to avoid excessive tightness. The strength can bedetermined by the number of layers used. Just 3-4 layers provide astring non-weigh-bearing cast and 5-6 layers are typically adequatefor weight-bearing cast.
6) Additionalafter the initial enwinding should be overlapped on itself toachieve good molding. Enwind the roll in 3-5 minutes afterimmersing in water because after that time it will beconcretion.
7) Smooth andrub the surface to achieve good contact between layers. Keepingsmoothness helps mold the wrap.
Allow about10 minutes for sufficient concretion and let patients not moveduring this time. It could bear electric weight after 20minutes.
8) It couldbe windowed, trimmed or removed with traditional cast sawequipment.
Notice: Please contact us by86 15206708971 or Skype:kldsales , you will get an unexpectedservice.
Model | Specification | Package | Color |
KCF02 | 5.0cm x 360cm | 1roll/bag, 10bags/box, 12boxes/ctn | White, Green, Red and Yellow |
KCF03 | 7.5cm x 360cm | 1roll/bag, 10bags/box, 12boxes/ctn | White, Green, Red and Yellow |
KCF04 | 10.0cm x 360cm | 1roll/bag, 10bags/box, 12boxes/ctn | White, Green, Red and Yellow |
KCF05 | 12.5cm x 360cm | 1roll/bag, 10bags/box, 12boxes/ctn | White, Green, Red and Yellow |
KCF06 | 15.0cm x 360cm | 1roll/bag, 10bags/box, 12boxes/ctn | White, Green, Red and Yellow |
Notice: Please contact us by86 15206708971 or Skype:kldsales , you will get an unexpectedservice.
