Description:
electromagnetic chuck for milling1 Simple Operation and high Clamping force
2 OEM available
3 CE
Magnetic chuck keyfeatures:
1. Magnetic powerful, high machining accuracy.Maximum suction table 13-16kg/cm ², is an ordinary magnetic suctioncup 2 times, to ensure that the workpiece clamping firm planmove does not appear strained, due process does not requireelectricity, so there is no heat distortion of the phenomenon ofproducts, effective ensure accuracy.
2. Safe, strong, energy saving, environmentalprotection. Magnetic sucker in the work process does not requireelectricity, rely on suction for holding permanent jobs, to avoidthe electromagnetic system and the cord is damaged in a suddenpower loss arising from the magnetic piece off the danger. Becauseonly in the charging electric permanent magnetic chuck and thedegaussing process energy used within 1-2 seconds, the work did notuse any energy and produce safe, strong, efficient power, botheconomic, and environmental protection.
3 .Electrical power in an instant after suckermagnet permanent magnet can be sucked into prison to locate theworkpiece processing, reverse current is applied, you can removethe workpiece demagnetization, security, energy saving, easy tooperate, no temperature variations, high machining accuracy. Theproduct is equipped with power supply unit for charging anddemagnetization.
DYCX series EP Magnetic chuckfor milling and planer
Standard type :Suitable for good qualitysurface workpieces.
Strong magnetic type :Suitable for badquality surface workpieces.
Main technicalparameters
50x50 Magnetic poles series(magnetic force ofsingle pole≥350kg)
| Type&Data | Magnetic polenumber | Total magneticforce(≤KN) | Overalldimension(mm) | Weight(kg) | ||||
| A | B | H(standard ) | H(Strongmagnetic) | M1(standard) | M2(Strongmagnetic) | |||
| DYCX-2333P50 | 12 | 42 | 230 | 330 | 56 | 71 | 32 | 40 |
| DYCX-2348P50 | 18 | 63 | 230 | 480 | 56 | 71 | 46 | 58 |
| DYCX-2362P50 | 24 | 84 | 230 | 620 | 56 | 71 | 58 | 76 |
| DYCX-2377P50 | 30 | 105 | 230 | 770 | 56 | 71 | 72 | 94 |
| DYCX-2392P50 | 36 | 126 | 230 | 920 | 56 | 71 | 86 | 112 |
| DYCX-2310P50 | 42 | 147 | 230 | 1070 | 56 | 71 | 100 | 130 |
| DYCX-3033P50 | 16 | 56 | 300 | 330 | 56 | 71 | 40 | 50 |
| DYCX-3048P50 | 24 | 84 | 300 | 480 | 56 | 71 | 60 | 75 |
| DYCX-3062P50 | 32 | 112 | 300 | 620 | 56 | 71 | 80 | 100 |
| DYCX-3077P50 | 40 | 140 | 300 | 770 | 56 | 71 | 100 | 125 |
What is a Permanent-Electro (Electro-Permanent) magneticchuck?
The latest of the three technologies, combines the advantages ofboth permanent magnets and electromagnets.
An electromagnetic force is required for just a couple of secondsto energize/orient the internal permanent magnets. oncemagnetized the product remains ON with permanent magneticforce. Equally, an electromagnetic force (in reverse) isrequired to turn the product OFF. Unlike electromagnets, theproduct is FAILSAFE and does not get hotter with time. Unlikepermanent magnetic products there are no moving parts and forcescan be much greater.
They can be used for palletizing, because once energized, the cablecan be removed.
What happens when power failures occur?
-Nothing changes with a permanent magnet.
-With a Permanent-Electro Magnet, the workpiece will stay clamped,but the magnet cannot be deactivated until the electrical power isrestored.
-An electromagnet will release the workpiece the moment the currentis removed from the internal coils.
What makes a good magnetic work holding application?
The primary advantages of clamping magnetically are:
-Better tool accessibility to the workpiece
-Speed of set up
-Uniform clamping means better accuracy
-Safety
-Low maintenance
There are more application specific advantages which themanufacturer will provide at the time of inquiry.
What is the minimum thickness I can clamp securely with a magneticchuck?
The pole design determines the magnetic field height and it isalways best that the whole field is contained within theworkpiece. Ask the manufacturer for recommended minimumthickness
