Description:
our company is a big manufacture and we can supply youdental labequipments with high quality and favourable price for vibratorvibrator pecifications:
Voltage | 220v/50hz±10% |
Power | 150w |
Maximum load | 2.5kg |
Dimension | 29x27x17cm |
Weight | 6kg |
Instruction:
1.Unpack the package,check if all the accessories are inside.Read this manual carefully before using.
2.Check the working platform of the machine,make sure it is laid flat and the regulator is not loosened.Adjust the regulator to
the minimum by turning it anti-clockwise.
3.Connect the machine to a power supply,the power indicator is on.Turn on the power switch and the machine starts vibrating.
4.Adjust the regulator to the required vibration amplitude .
5.Put the mold on the platform and hold it with both hands,and the mold is ready to be filled.After filling the mold,turn off the
power.
6.The machine can work for 20minutes continuously.
Cautions:
1.The storage temperature should be between-20 and 40°C.and the machine must be kept in a dry environment,the temperature
must not be too high.
2.Do not hit or crash the machine,do not expose the machine to water.
3.The maximum load is 6.5kg
4.If the machine does not work,check if the power supply is connected.If the power indicator is normal,open the black
rubber cover and adjust the four screws in the front for the vibrator amplitude.
