Description:
1)30/60 mesh garnet2)High quality, High purity
3)Recyclable, wide application
4)ISO9001, SGS
5)Less Dusty
30/60 meshgarnet
HONEST HORSE Garnet is a high purity garnet sand which is preferably used for
precision water jet cutting. Its surface texture and the achieved cutting speeds make
Garnet the ideal abrasive for micro water jet technology.
Each grain has a unique structure which is why the fission of the crystals happens
along the fracture line. In turn, very sharp edges are produced. As rock garnet crystals
have sharper, square edges, the cutting speeds can be increased. HONEST HORSE
Garnet is particularly used for challenging cutting work and guarantees minimal kerfs
and clean, fine edges.
The dust level of this abrasive is extremely low thanks to the high degree of purity. This
results in lower downtimes (less clogging), low-cost operation and easier removal.
All products are subject to strict quality assurance and inspection and comply with
our high standards.
TECHNICAL DETAILS
PHYSICAL CHARACTERISTICS :
Specific Weight: 4.1 g/cm3
Average Bulk: 2.4 g/cm3
Hardness: 8 (Mohs Scale)
OTHER CHARACTERISTICS :
Crystal System: Cubic
Habit: Dodecadnedron with occasional
Trapezohedron
Fracture: Sub-Conchoidal
Durability: Very good
Free Flow: 90% Minimum
Susceptibility to Acid: None
Moisture Absorption: Non Hygroscopic, Inert.
Magnetism: Very Slightly Magnetic
Conductivity: Less than 25 Microsiemens per Meter
Radio Activity: Not Detectable above background
ANALYSIS & CHARACTERISTICS
CHLORIDE CONTENT: Less than 50 ppm
SOLUBLE SALTS: Less than 100 ppm
PH OF AQUEOUS MEDIUM: 6.93
GYPSUM CONTENT: Nil
MOISTURE CONTENT:Less than 0.5%
Chemical Composition(%)
Proportion | 3.9 g/cm3 | Volume weight | 2.5 g/cm3 | |||
Hardness | 7.5-8.0 mohs | Melting point | 1318 °C | |||
SiO2 | 34-40% | Al2O3 | 19-21% | |||
Fe2O3 | 28-33% | Water rate | 0.08% | |||
CaO | 1.0-10.0% | MnO | 1.0-2.0% | |||
MgO | 5-6% | TiO2 | 1.0-2.0% | |||
Pictureof garnet 30/60 mesh
20/40 Mesh: It is the most cost effective and excellent abrasive of its kind. Its repeatability
makes it suited for fast and efficient removal of existing coatings when compared to other
traditionally used abrasive medium. Surface profile: 50-90 microns.
30/60 Mesh: It is perfect for all types of blasting applications including, removing existing
coating, rust and other contamination. it is an ideal choice for superior surface preparation
for new steel prior to tank coating, for pipelines-both internal and external,
fabricated steel and structures, etc. Also used for effective removal of mill scale, it is the
most preferred as a Slurry- Blast Grade and High Pressure Hydro-Blasting Abrasive.
Surface Profile: 50-75 microns.
80 Mesh: Possessing highest efficiency on new steel/mill scale due to highest grain count
per weight/volume makes it an ideal choice for surface preparation of Aluminium and non-ferrous surfaces.
Wideapplication
Garnet abrasive waterjet cutting applications
§ tile cutting
§ countertops
§ stone cutting
§ food processing equipment
§ glass cutting
§ Kevlar cutting
§ aluminum cutting
§ stainless steel cutting
Garnet abrasive sandblasting applications
§ turbine repair
§ heavy equipment repair
§ industrial painting contracting
§ shipbuilding and ship repair
§ blast rooms
§ denim blasting
§ powder coating
Package:
Pleasegive us an opportunity, we can do better for you.
If you have any problem, please email us.
