Description:
1.Good heat-resistant2.Strong activity.
3.High melting point
purchase SiCpowder(0-1mm, 1-10mm or as your reqiurments)
Description
Black silicon carbide is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw materials.
Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused alumina. It is brittle and sharp has electrical and heat conductivity in some degree.
The abrasives made of it are suitable for working on cast iron, non-ferrous metal, rock, leather, rubber, etc. It is also broadly used as refractory material and metallurgical additive.
Advantages
1. Corrosion resistance, high strength, high hardness.
2. Good wear-resisting performance,resist to shock.
3. It is a cost-effective substitute for Ferrosilicon.
4. It has Multi-functions.
A: Remove oxygen from iron compound.
B: Adjust the carbon content.
C: Act as a fuel and provide energy.
5. It costs less than ferrosilicon and carbon combination.
6. It has no dust nuisance while feeding the material.
7. It can speed up the reaction.
Specification
Chemical composition
Spec. | Chemical Composition(%) | ||
SiC | F.C | Fe2O3 | |
≥ | ≤ | ||
SiC98.5 | 98.5 | 0.20 | 0.60 |
SiC98 | 98 | 0.30 | 0.80 |
SiC97 | 97 | 0.30 | 1.00 |
SiC95 | 95 | 0.40 | 1.00 |
SiC90 | 90 | 0.60 | 1.20 |
SiC70 | 70 | 3 | |
SiC65 | 65 | 5 | |
SiC60 | 60 | 10 | |
SiC55 | 55 | 10 | |
SiC50 | 50 | 10 | |
