Description:

• Rated voltage x 175% for 1 to 5 seconds

• Between terminals and case (TC):

• Rated voltage x 2 1, 000V for one minute, at25oC

• Dissipation factor (DF): 0.5% maximum, when measured at 1kHz,25oC
• Insulation resistance (IR):

• Between terminals: above 1, 000ΩF, at in 100V DC at25oC
• Between terminals and case: above 10, 000mΩ, at 500V DC at25oC

• Pull test:

• Will sustain 2kg steady pull in the direction of lead egressand 1kg steady pull at any 90 degrees angle for 60 seconds
• After test, capacitor shall show no evidence of damage and passall electrical requirements

• Damp-heat test:

• Capacitor are subjected to an environmental test chamber at RH90 to 95%, operating temperatures for 240 hours
• After the test, capacitor shall be conditioned at roomtemperature for 2 hours and meet the following criteria:
  • Capacitance change shall be less than 3%
  • Dissipation factor shall be less than 0.2%
  • Insulation resistance shall be over 50% of the minimumrequirement

• Life test:

• On/off: 100, 000 cycle ± 5, 000 times on 2 seconds off 2seconds at operating temperatures with rated voltage
• After the test, the capacitance drift 5%, dissipation factor0.5%, insulation resistance 50%