Price:0.00 USD/Negotiable

Send Inquiry

Description:

YC248 0402 16P8R 1% - Thick Film Chip Resistors Network - HighStability - High Reliability - High Precession

YC248 0402 16P8R 1% - Thick Film Chip ResistorsNetwork

YC4P2R - ELECTRICAL CHARACTERISTICS
STYLE	YC12
Power Rating at 70	1/16W
Operating Temp. Range	-55 to 125(Derated to 0 Load at 125)
Maximum Working Voltage	50V
Maximum Overload Voltage	100V
Dielectric Withstand Voltage	100V
Number of Resistors	2
Resistance Range	10Ω ~ 1MΩ
Temperature Coefficient	- 200PPM/
Resistance Tolerance	- 5%

• Electrical properties of YC12 series:
  • Power rating at 70 degrees Celsius: 1/16W
  • Operating temperature: -55 to 125 degrees Celsius (derated to 0load at 125 degrees Celsius)
  • Maximum working voltage: 50V
  • Maximum overload voltage: 100V
  • Dielectric withstand voltage: 100V
  • Number of resistors: two
  • Resistance range: 10 to 1M ohms
  • Temperature coefficient: /-200ppm/degrees Celsius
  • Resistance
  • tolerance: /-5%, /-1%
• Environmental properties of YC12 series:
  • Temperature coefficient: MIL-STD-202F, method 304,
  • -55 to 125 degrees Celsius, /- 200ppm/degrees Celsius
  • Thermal shock: MIL-STD-202F, method 107, 5 cycles, -55
  • to 125 degrees Celsius (step by step 2 minutes), /- (1% 0.05ohms)
  • Low temperature operation: MIL-R-55342D, para.4.7.4,
  • one hour at -65 degrees Celsius followed by 45 minutes RCWV, /-(1% 0.05 ohm)
  • Short time overload: MIL-R-55342D, para.4.7.5, 25 times RCWVfor 5 seconds, /- (2% 0.05 ohm)
  • Insulation resistance: MIL-STD-202F, method 302, RCOV for 1minute, >10G ohms
  • Dielectric withstand voltage: MIL-STD-202F, method 301, R.M.Sfor 1 minute, by type
  • Resistance to soldering heat: MIL-STD-202F, method 210C,soldered to test board at 260 degrees Celsius for 10 seconds, /-(1% 0.05 ohm)
  • Moisture resistance: MIL-STD-202F, method 106F, 42 cycles
  • Total 1000 hours, /- (2% 0.1 ohm)
  • Life: MIL-STD-202F, method 108A, 1000 hours at 70 degreesCelsius RCWV intermittent, /- (3% 0.1 ohm)
  • Solderability: MIL-STD-202F, method 208G, 230 degrees Celsiusfor 5 seconds, >95% coverage
  • Bending strength: JIS-C-5202, para.6.1.4, unit mounted incenter of 90mm board length, deflected 1mm in either direction for5 seconds,
  • /- (1% 0.05 ohm)
• Also available for YC16 and YC32 series:
  • Power rating at 70 degrees Celsius: 1/16W and 1/8W
  • Resistance tolerance: /-5%
• Also available for YC15, YC17 and YC35 series:
  • Power rating at 70 degrees Celsius: 1/32W, 1/32W and 1/16W
  • Resistance tolerance: /-5%