Description:
1. base material :18/12.5 , 35/25 Pi2. Min hole size : 0.15mm
3. Min width/space 2/2mil
4. Sample quick turn: 3 days
We are dedicated to providing the best FPC products to ourcustomers with our advanced equipment, meticulous techniques,stringent quality control, scientific operational management,reasonable pricing, and trust-worthy business practice.
Number of Layer |
| 1~8(Rigid-Flex & Multilayers FPC) |
|
Min. Track Width/Spacing | Single Sided | 0.030 mm / 0.040 mm |
|
Double Sided | 0.030 mm / 0.050 mm |
| |
Min. Hole Diameter | Drilling P.T.H. | 0.2 mm |
|
Punching | 1.0 mm |
| |
Dimension Tolerances | Conductor Width (W) | 0.020 mm | W0.5mm |
Hole Diameter (H) | 0.05 mm (withP.T.H.0.1mm) | H1.5mm | |
Accumulated Pitch (P) | 0.015 mm | P25mm | |
Outline Dimension (L) | 0.05 mm | L50 mm | |
Conductors and Outline (C) | 0.15 mm (Special 0.07mm) | C5.0 mm | |
Conductors and Coverlay | 0.3~0.5 mm |
| |
Surface Treatment on Terminals and land Areas | Soft or Hard Ni/Au Sn/Pb (2~60μm) PrimaryFluxCarbon Printed (4~10μm Silver Gel printed |
| |
Insulation Resistance | 1000MW | IPC-TM-650 2.6.3.2 at Ambient | |
Thanks for you enquire. akspcb if hotmail. that''s ok
