Send Inquiry
Description:
Toroid Power Inductors with 1 to 1, 200uH Inductance Range and Over100M Ohms Insulating Resistance- Low profile toroid power inductor
- Low DCR SMD toroid power inductor
- Large-current SMD toroid power inductor
- Toroid power choke coils
- Toroid high current inductor
- Toroid MPP core inductor, sendust core inductor, and Hi-fluxinductor
- Operating temperature: -20 to 85 degrees (contain heatingcoil)
- Appearance inspection: no external defect by visualinspection
- Terminal strength: after soldering, between copper plate andterminals of coil, push in two directions of X, Y with standing asbelow conditions
- Terminal should not peeled off
- Heat endurance of re-flow soldering: 240
- Insulating resistance: over 100M ohms at 100V DC between wireand core
- Dielectric strength: no dielectric breakdown at 100V DC for oneminute between wire and core
- Temperature characteristic: inductance coefficient (0 to 2,000) x 10-6/(-25 to 80) inductance deviation within /-5.0%, after96 hours
- Humidity characteristic: in 90 to 95% relative humidity at 40±2and one hour drying under normal condition. Inductance deviationwithin ±5.0% after vibration for one hour
- Vibration resistance: in each of three orientations at sweepvibration (10-55-10Hz) with 1.5mm p-p amplitude
- Similar to coil craft and Toko, Sumida, TDK, and Muratabrands
