Description:
Excellent segment uniformity.Sold state reliability
Industrial standard size.
Low power consumption.
Features:
- 0.40″(inch) digit height.
- Excellentsegment uniformity.
- Soldstate reliability.
- Industrialstandard size.
- Lowpower consumption.
- Theproduct itself will remain within RoHS compliantVersion.
Descriptions:
- The BL3-401XRB seriesis a lager10.20mm(0.40″)high sevensegmentsdisplaydesignedfor viewing distances up to 7 meters.
- Thesedisplays provide excellent reliability in bright ambientlight.
- These devices are madewith whitesegmentsand blacksurface.
Applications:
- Audioequipment.
- Instrumentpanels.
- Digital read outdisplay.
DeviceSelection Guide:
ModelNo. | Chip Material | SourceColor | Description |
BL3-401ARB | GaAlAs | SuperBright Red | CommonAnode |
BL3-401CRB | SuperBright Red | CommonCathode |
PackageDimension:
Notes:
- Alldimensions are in millimeters (inches).
- Toleranceis ± 0.25 mm (.010″) unless otherwise noted.
- Specificationsare subject to change without notice.
Absolute Maximum Ratings atTa=25°c
Parameters | Symbol | Max. | Unit |
PowerDissipation PerSegment | PD | 100 | mW |
Peak ForwardCurrent PerSegment (1/10Duty Cycle, 0.1ms Pulse Width) | IFP | 100 | mA |
Forward CurrentPerSegment | IF | 20 | mA |
Dating Linear From50°C |
| 0.4 | mA/°c |
ReverseVoltage | VR | 5 | V |
OperatingTemperature Range | Topr | -40°cto80°C | |
StorageTemperature Range | Tstg | -40°cto85°c | |
SolderingTemperature | Tsld | 260°cfor 5Seconds | |
Electrical Optical Characteristics atTa=25°c
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
LuminousIntensity | Iv | 2.0 | 4.0 | --- | mcd | IF=20mA(Note 1) |
Luminous IntensityMatchingRatio(SegmentTo Segment) | Iv-m | --- | --- | 2:1 |
| IF=20mA |
PeakEmission Wavelength | λp | --- | 660 | --- | nm | IF=20mA |
DominantWavelength | λd | --- | 640 | --- | nm | IF=20mA (Note2) |
SpectralLine Half-Width | Δλ | --- | 20 | --- | nm | IF=20mA |
ForwardVoltage | VF | 1.80 | 2.20 | 2.80 | V | IF=20mA |
ReverseCurrent | IR | --- | --- | 50 | µA | VR=5V |
Notes:
- Luminousintensity is measured with a light sensor and filter combinationthat approximates the CIE eye-response curve.
- Thedominant wavelength (λd) is derived from the CIE chromaticitydiagram and represents the single wavelength which defines thecolor of the device.
TradeTerms:
- Payment:T/T, Western Union
- Leadtime: 3~5 days for samples, and 15-20days for bulkorder
- Shippingport: Shenzhen
- Shippingfreight are quoted under your requests
- MOQ:1Kea


