Price:Negotiable

Send Inquiry

Description:

For full color RGB display synch control system sending card
1.Control range: 1024 * 640 / 1280 * 512 pixel
2.Scan type:1/4, 1/

Product Description

For full color RGB displaysynch control system sending card1.Control range: 1024 * 640 / 1280 * 512pixel2.Scan type:1/4, 1/8, 1/16, staticconstant current3.Communicate mode:DVI & Twisted Pair  UPT /RJ454.weight:300g5.Size:144.0mm X91.2mm6.Workingvoltage:DC 5-12V Fully compatiblewith the seventhgenerationUpgrade based on the seventhgeneration development, the original function of many more newfeatures more powerful, more stable and more reliablesystem.Systems can be mixed with sevengenerations.Support 10-bitcolor

The old system of 8-bit color candisplay 256X256X256 = 1677216 colors, the new system color number1024X1024X1024 = 1073741824 colors, the new system the number ofcolors is 64 times the old system.
Intelligent connectivity

With a display of multiple receivercard / box (including the spare) can be exchanged without anyre-set, to receive the smart card to identify the need to displaythe contents of the earth.
Intelligent monitoring

Every receiving card has fourtemperature sensing and fan control output, according to thetemperature limit set by the user to control four intelligent fanspeed.
Company icon

When the power did not send a card onthe display automatically when the set point of the company''simage, image pixels to 128X128, 16K colors for thecolor.
Support within any 16-bit scanning

1, 2, 4, 8, 16 original system onlysupports scanning, scan the new system 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16 .
Support the module width of any number less than 64

The old system only supports 2, 4, 8,16, 32, 64-width module, the new system is 64 or less arbitrarynumber.
Support shaped split display

Every receiving card, maximum support1024 segments split for abnormal / text screen.
Support more than content insertion

Each access point can be set to thenumber of pixels of one or more empty for abnormalscreen.
Driver IC with PWM support

Need special driver chip, therebyenabling the display effect is even more perfect.
Support for hardware-by-point correction

Need special driver chip, therebyenabling better display point by point correction.

Support-by-point detection

With special driver chip to bedynamically display flaw detection situation.
By-point correction, by card (box)correction

Support a single point-by-pointcorrection, 2 × 2 , 4 × 4 points and 8 × 8 four kinds of correctionmodes, the maximum correction 6144 points / module, red, green andblue 256. By card (box) correction for the display of theinter-tile color correction, red, green and blue 256.
Identification card function

Intelligent identification programcan recognize two-color, full-color, virtual, lighting and othervarious boards of various drive scanning and a variety of signalsto identify the rate of 99%, a set of cards in hand, doing screenof mind.
65536 (64K) gray set of arbitrary functions

Customers can monitor the situationnever gray to 65536 (64K) adjust the gray, so that you achieve thebest screen display.
Refresh rate be set up, lock, synchronization

Refresh rate from 10Hz-3000Hz can bearbitrarily set, refresh rate lock feature allows the displayrefresh locked at integral multiple computer monitors refresh rate,and to prevent tearing, to ensure perfect imagereproduction. Phase-locked range of 47Hz-76Hz.
Loading Capacity

Maximum with dual cable set1280x1024, the largest single cable with load 1024x640,1280x512
Dual-cable hot backup

Receiving the card A, B two-port canbe used as input or output ports can be used to simultaneouslycontrol two computers one screen, when a computer problem occurs,automatically take over another computer, a computer can also beused for dual-network line control, when a cable problem, theother automatically takes over a network cable, allows the displayof the work to get maximum protection.
Multi-display Synchronous and Combination Functions


Send cards to support a control panelwith a multi-block, multi-block-screen work status can be anycombination, synchronous display, independent play, etc., byshortcut keys, fast switching.
256automatic 

256 brightness adjustment featureallows you to adjust the display brightness is moreeffective.
Programonline updatefeaturebrightnessadjustment

If the display of the receiver cardprogram to be upgraded, just open the big-screen power through theLED studio can upgrade without having to receive the card can beremoved from the big-screen update.
Break through the traditional concept of no DIP switches

No DIP switch design, all thesettings set by the computer.
Test function

Receiver card integration test function, do not send a card to takethe test screen, slash, gray, red, green, blue, light and otherfull-test mode.

Long distance

Transmission up to 170 m (measured),to ensure transmission to 140meters. 

1 pcscontrolcard

1 PCSDVI male/malecable

1 PCSUSBcable

1 setCD-Software

 

 SHIPPING POLICY:

Shipping free

I will send the item out within 3 days afterpayment completion on businessdays. 

 

TERMS:

• 1 yearwarranty.
• If the item is defective, please notify uswithin 3 days after the receipt of theitem.
• The item shall be return in its originalcondition, in order to get it refunded orreplaced.
• The item is not refundable after 7 days, it willonly berepaired.
• We do not haveresponsible for tax in yourcountry