Description:
1.certification ISO9001, MSDS, SGS, RoHS standards 2.Electricalinsulation properties 3.High mechanical properties
This product is a kind of laminated board formedthrough heat pressing after the electric industry fiolax cloth dipsinto epoxy resin. It is suitable as the mechanical, electric andelectronic insulation structural components which are used underroom and middle temperatures with a certain mechanical performanceand electric performance requirement.
- Maximum sizes: 1020 X 1220 mm1220X 2440mm | - Thickness: From 0.1mm 150mm |
- Colour: Light Green / Natural / Black / Brown / Red / Orange / Yellow / Green / Blue / Purple / Ash / White / Carbon or based on the users special color. | |
- On demand we can deliver strips or finished components | - Surfaces: Shining |
FR4 SheetCharacteristics:
1.Define and purpose
2.High mechanical property
3.Stable dielectric property
4.Thickness 0.1-150mm
5.high mechanical property
6.good resistance to Waterlogging.
7.Widely used in electrical appliances, as insulating parts inGenerator and Motor.
I. POM SheetDescription:
1.Resistance to flame ( V-0 ).
2.Very low hygrometric susceptibility
3.Excellent mechanical properties when cold
2.Technical requirement
.2.1 Outside appearance
.The board material should be flat and smooth, nobubble, no wrinkle, no crackle, free from other defect, such asscrape, compress, dirt spot and uneven of color, allow a few ofcolor spots.
The board material should be flat and smooth, nobubble, no wrinkle, no crackle, free from other defect, such asscrape, compress, dirt spot and uneven of color, allow a few ofcolor spots.
II.FR4 SheetApplications:
Very convenient for equipment for high frequencies and in general for all elements put under high dynamic stresses with high resistance to fatigue, can also be used extensively for test instrucments of PCB, and sports equipment.
III. FR4 SheetCharacteristics:
1.Define and purpose
2.High mechanical property
3.Stable dielectric property
4.Thickness 0.1-150mm
5.high mechanical property
6.good resistance to Waterlogging.
7.Widely used in electrical appliances, asinsulating parts in Generator and Motor.
Main propertyindication
Item | Unit | Indication |
Flexural Strengthat perpendicular tolamination | MPa | ≥362 |
Modulus of Elasticity in Flexure | MPa | ≥20762 |
Compressive strength | MPa | ≥561 |
Impact strength parallel to lamination
| KJ/M2 | ≥55 |
Shear strength at parallel to lamination | MPa | ≥45 |
Tensile strength | MPa | ≥300 |
Water Obsorption | mg | ≤6.6 |
Board size(mm) | 1020×1220 1220×2440 | |
