Description:
PCB mount change-over moulded reed sensorISO9001, RoHS compliant.
Long life, safety, high sensitivity.
Easy to use, stable
PCB mount change-over moulded reed sensor
(1)Reed sensor is applicable for position determination of pneumaticand /or hydraulic cylinder and piston pump. It also can be used aslimit switch.
(2)When the magnetic object approaches, the reed closes and sends outswitch signal through magnification. Compared with inductivesensor. it has the following strong points: can be installed inmetal closely and side by side and detect through metalobject.
(3)Its detection distance subjects to the intensity of magnetic fieldof detected object. Reed sensor is not applicable in the occasionof severe vibration.
(4)No standby power requirement. Suit to tough environment and longlife. Performance is steady and easy to used. Environment-friendlyproducts.
TechincalDatas:
SwitchedPower(max) | 3W |
AmpereTurns | 15-40 |
SwitchVoltage(max) | DC100V |
SwitchedCurrent(max) | 0.25A |
BreakdownVoltage(min) | DC200V |
CarryCurrent(min) | 1.0A |
ContanctResisitance(max) | 200mmOh |
InsulationResistance(min) | 109mOh |
| ScrewMounting Form Reed SensorMS05,MS06, MS14, MS15 and MS17 aremadein rectangular flat plastic housings with cableterminals.They can be mounted using the screw fastening holes orslots. Through-hole Reed SensorsMS13and MS03 are plastic encapsulatedsensorsfor through-hole mounting on a PCB(PrintedCircuit Board).Latching Sensors MS13and MS17 sensors are magnetically biasedswitches with a latching/bistable function anddefined polarization. CylindricalForm Reed SensorMS07, MS08, MS18, MS10 and MS09 are cylindrically-shaped sensors with cable terminalsSMTSensors & Panel Mount Sensors MS01-01 and MS02-01 are available in a diverse range of lengths and different designs for surface mounting. SMD products are supplied in Tape & Reelpackaging. |
