Price:0.00 USD/Negotiable

Send Inquiry

Description:

1.Dimmable Microwave Sensor
2.Delaying Time, Ambient Light and Detection Distanceadjustable
3.Standby brightness can be 10-60%

KA-DP10 DimmableMicrowave Sensor Specifications:

1) Power source: 90-240V/AC 
2) Power frequency: 50/60Hz 
3) Rated load: 200W Max. (220VACFluorescent) 
4) HF system: 5.8GHz CW radar, ISMband 
5) Installation sit: Ceiling mounting, Wallinstallation 
6) Transmission power: <0.2mW 
7) Detection range: 1m/2m/3m/4m/5m/7m/9m/12m(radii.) 
8) Light-control: 15-330LUX 
9) Detection angle: 360° (Ceilinginstallation) 
180° (wall installation) 
10) Time setting: Delay time:10sec/20sec/30sec/50sec/ 
90sec /150sec/210sec/300sec 
11) half bright state(standby time):0.5min/1min/3min/5min/ 
10min/20min/40min/60min 
12) Standby power: Approx. 0.5W 
13) The dimmable standby brightness can be10-60% 
14) KA-DP10 is according to the ambient brightness regulatingpotentiometer, the light source of luminance changes between 10% to100%. With the clockwise, the luminance increases,while 
Anti-clockwise, decreases. It can set the ambientbrightness.  

 

Productintroduction:

This product will be faithfully waiting for you. It will turn onthe light automatically when you pass by, and turn off the lightautomatically when you leave off. You can set the closing delaytime to meet your needs. For example, you may adjust the TIMEsliding controller to select the delay time 12sec~30min when youthink you will come back in 10mins. The TIME sliding controller isas follow (Keep away from the detecting zone after adjusting thetesting time or that the
detecting time will be inaccurate when any moving object isdetected again by the product).  

 

KA-DP10Dimension:

 

KA-DP10 DetectionInformation:

 

 

The Descriptionof KA-DP10 Components:

 

How does KA-DP10 work?

 

Take an example: One day in office. Ambient brightness is set for300LUX. 

8: 00AM, People to office, lamp on100%, surroundlighting300lux. 
8: 05AM, Curtain opened, natural light gets in, lamp on 70%,surround lighting300lux. 
9: 00AM, People are out for coffee, lamp on 10% during the shortabsence. 
9: 15AM, Somebody returns, lamp on 40%(daylight is gettingstronger), surround lighting300lux. 
12: 00AM, External light reaches300lux, system shutsdown. 
5: 00PM, External light below300lux, system re-activated, lamp on60%. 
6: 00PM, People leaves office, system in stand-by mode, lamp on10%. 
6: 30PM, Stand-by time out, system shuts down.