Description:
RS232 to CAN Bus converter makes it possible to connect a hostPC/HMI Display into a CAN Bus Network.RS-232 to CANBUS converter, built-inprotocol Features:
Antistatic, lightning-proof, surge suppression, and support hotplug;
5 V power supply, power isolation module, isolation voltage of 3000VDC, without serial port power supply, suitable for single-chipinstrument serialinterface;
Adaptive 0 ~ 150Kbps communicationrates;
Communication distance up to 3 km when 9.6 Kbps, and 5 km when 600BPS.
HK-5104 is a half-duplex RS232-CAN isolated converters. By RS-232level CanBus into bus-level transmission, to extend the distance ofRS-232 communication purposes.
Unique technology andprocess:
1, 2-wire communication, half-duplex;
2, a unique serial protection circuit, have lightning antistatic,antioxidant, surge suppression, could bring electrothermalplug;
3, power, has the power to isolate module, isolation voltage 3000VDC power supply, without serial port, designed for single-chip,and so on instrument serial;
4, CanBus data line transient interference suppression, antistatic,lightning;
5, haul 9.6Kbps up to 3 km/h when, 600bps up to five kilometreswhen;
6, built-in intelligent module, automatically identifying CanBussignal flow direction, without delay transparent transmission,communications rate of 0 ~ 150Kbps adaptive;
7, industry-level design, operating temperature range:-85 ° c, allimported components, optimization, surface-mountprocess;
