Description:
1.against all kinds of animal2.Solar Panel
3.Ultrasonic
4.CE&RoHS&FCC&TUV
$zhanwei$
$zhanwei$
chinasupplier ultrasonic anti bison as seen on tv2014
1.Thisrepeller is designed for permanent service allowing you to installit once and let it work!
2. It is weather-proofallowing it to work all year-round and in virtually all weatherconditions.
3.It uses solar power torecharge the batteries so its always working.
4.The Passive InfraRedsensor (PIR) detects motion and triggers the ultrasonic speakeremitting a tone that people cannot hear but chases away commonoutdoor pests like dogs, cats, deer, raccoons, mice, skunks,squirrels and more.
5.This solar animalrepeller is a safe and humane way to keep unwanted animals away!
Technicaldata
Theory | Ultrasonic(18-25KHz) |
Repeltype | Cat, dog, fox, deer, rat,squirrels |
Color | Deep green orOEM |
power | 4 x "AA" Ni-CD rechargeable batteries |
Solar panel | Amorphous |
Coverage area | 30 feet @ 110° = 2,425 square feet |
Usage | Garden/lawn |
itemsize | 37*14*9.5cm |
QTY/CTN | 24pcs |
Unitbox | 15.6x14.5x7.6cm |
Unitcarton | 48*31.5*31cm |
N.W./G.W | 8KGS/9KGS |
Product detail
$zhanwei$
To Assemble andInstall
1. Unpack the unit completely and confirm thatall parts are present. SEE FIGURES 1-4above.
2. Connect the repeller head, pole sections,connecting part and ground stake. SEE FIGURES 1-4above.
3. Turn power switch to "ON" position. SEE FIGURE2.
4. The PIR repeller is designed to be left ONcontinuously. It uses four "AA" size Ni-CD rechargeablebatteries.
5. once turned ON, the LED light and ultrasonicsignal will activate for 15 seconds. Following this activation, theunit will move to stand-bymode.
6. The unit is now ready for installation. Thelocation should allow adequate sunlight to keep the batteries fullycharged. Be sure that the area needing protection is within theeffective range of the repeller. SEE FIGURE2.
7. For best results, keep the repeller headroughly 9-10 inches aboveground.
8. Take care not to stress or break the repellerwhen installing in hard ground. It is a good idea to prepare theground for the ground stake to avoid damage to theunit.
9. When the PIR sensor detects motion, the LEDlight will flash for 3 seconds and the ultrasonic signal will runfor 15 seconds. Following this, the repeller will return tostand-by mode.
$zhanwei$
WARNING!
Always check for underground utilities, cables orwires before digging or installing!
Failure to check could result in personal injury,property damage or even death.
CAUTION!
1.Allow the Animal Repeller tooperate continuously for best results.
2.Do not immerse repeller inwater.
3.Do not cover-up the PIRsensor.
4.To clean the repeller, use adamp-soft cloth and mild soap with water.
5.Do not use harshchemicals or abrasive cleaning agents that may damage therepeller.
Product showing
$zhanwei$
$zhanwei$
$zhanwei$
$zhanwei$
GlobalNetwork
$zhanwei$$zhanwei$
$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$$zhanwei$
