Description:
1.Good at integration, simple external circuit, small size2.Avaliable in 44-pin TQFPpackage
3.two channels DMA
4.4k bytes
Fieldbus Communication Controller, ramchip/mcu IC
(According to IEC61158)
General Description
FBC0409 is a fieldbus interfaceand controller IC which conforms to IEC 61158 filedbus physicallayer definition. It supports typical embedded CPU and MCU, andsatisfies the demands of high performance fieldbus masters orslavers.
FBC0409 contains Manchester data encoder and decoder on chip. Itrequires a medium interface and external filter for connection to afieldbus system, and can automatically correct bus polarity.FBC0409 also contains 4k bytes embedded data RAM, applying DMAcontroller. The implementation of message transmission and addressresolution can be executed without CPU intervention. The Rx and Txdata status is available in status registers of FBC0409, such asstatus of line operation, code error, frame loss, framecollision.
FBC0409 implement a portion of data-link layer function. Tx/Rxframe check sequence (FCS), 16 bits 1ms timer, 16 bits 1/32mstimer, 16 bits octet time timer, frame code decoding and addressresolution.
Features
FBC0409 is designed for fieldbus physical and part data linkcommunication functions, details list below:
- Supports line data rate 31.25K Bit/S
- Build-in Manchester Encoder/Decoder
- Transmitter Jibber inhibit, receiver super long frameinhibit
- Automatic parity recognize and correct
- Message type and destination address detectionautomatically
- Automatic transmitter and receiver frame check
- Build-in three channels DMA controller, used to control datatransmitting, receiving and address recognization looking up tablememory management
- 4k bytes asynchronous SRAM internal as communication buffer fortransmitting, receiving and address lookup table memory
- Length of Preamble, Start and Stop delimiter under softwarecontrolled
- Build-in bus arbiter, CPU accessing internal SRAMcorrectly
- Data link layer timer ( 1ms, 1/32 ms, octet time timer )
- Designed lots of useful interrupt and status Registers
- Compatibility with INTEL, ARM serials CPU
- Internal loop back for test
- STANDBY feature
- Power supply: 2.7~5.5V
- Power consumption: <600uA
- Operating temperature range: -40°C~85°C
- Available in 44-pins TQFP package
Characteristics
Thermal Information
Storage temperature:-65~150°C;
Operating temperature:-40~85°C;
Long-term operating junction temperature:-40~85°C
DC/AC Characteristics
Please contact us for detail.




