Description:
18650 digital camera battery cell1.Model:18650
2.Material:lithium ion
3.Shape:cylinder
4.CE.RoHs.Pony
2013 new Rechargeable Battery/Lithium Ion 18650 Battery/digitalcamera battery cell
Specification
Model: | 18650 |
NominalCapacity: | 2200mAh |
MinimumCapacity: | 2150mAh |
Diameter: | 18.2±0.2mm |
Height: | 64.5±0.5mm |
Weight: | 45g |
MaxDischarge Rate: | 2C |
NominalVoltage: | 3.7V |
InternalResistance: | ≤80mΩ |
ChargingTemperature: | 0-45°C |
Dischargingtemperature: | -20-60°C |
Storagetemperature: | -20-45°C |
Productperformance Tests
Safetyperformance: All safety performance test all passed (referto UL1642:2005 and IEC62133:2003 security testing method), andenvironmental compatibility performance testing passed.
Items | Criteria | Conditions |
Hightemperature | No fire orexplosion | Under hightemperature135°C for at least 30 minutes |
Overcharge | No fire orexplosion | Chargeunder condition of constant current 3C and constant Voltage4.8V |
Shortcircuit | No fire orexplosion | Connectedtwo poles at the temperature of 25°C |
Constantlycharge | No leakage,no fire, no explosion and no pressure relief | Chargeunder cut-off voltage and end-off current |
Needleacupuncture | No fire orno explosion | Charge at0.2C, and then leave for 24hrs, check battery before / after cutthrough battery with needle which diameter is between3mm~6mm |
FeatureDescription
1. High capacity and long cycle life
2. Stable performance under working temperature range
3. Installed protect board keep cells from short-circuit, over-chargeand over-discharger
4. Could be used for energy storage devices, digital products andother electric products.
Application of18650 lithium ion battery
.Communication equipment: Cordless phones, walkie-talkie
.Information equipment: Laptop, PDA, portable fax machines,printers
.Audio-visual equipment: : Digital cameras, camcorders, DVD, VCD,MD, CD drive
. Lamps:Emergency lights, solar lightsSearchlight, flashlight
.Electronic toys: Remote control cars, remote control boats,aircraft model
. PowerTools: An electric drill, planer, electric, electricityapproved
. Otherpurposes: Electric shaver, massager, electric toothbrush, mobileterminal equipment
SafetyNotes
1. Do notimmerse the battery in water or seawater, and keep the battery in acool dry surrounding if it stands by.
2. Do notuse or leave the battery near a heat source as fire orheater.
3. Use thebattery charger specifically for that purpose whenrecharging.
4. Thebattery only can be soldered on the Al/Ni composite strip of thebottom.
5. Do notreverse the position and negative terminals.
6. Do notconnect the battery to an electrical outlet.
7. Do notdiscard the battery in fire or a heater.
8. Do notshort-circuit the battery by directly connecting the positive andnegative terminals with metal objects.
9. Do nottransport or store the battery together with metal objects such ashairpins, necklaces, etc.
10. Do notstrike, trample or throw the battery.
11.Do not directly solder the battery and pierce the battery with anail or other sharp objects.
12. Do notuse or leave the battery at high temperature (for example, atstrong direct sunlight or in a vehicle in extremely hot weather).Otherwise, it can overheat or fire or its performance will bedegenerate and its service life will be decreased.
13. Do notuse the battery in a location where static electricity and magneticfield is great, otherwise, the safety devices may be damaged,causing hidden trouble of safety.
14. If thebattery leaks and the electrolyte get into the eyes, do not rub theeyes, instead, rinse the eyes with clean water, and immediatelyseek medical attention. Otherwise, it may injure eyes.
15.If thebattery gives off an odor, generates heat, becomes discolored ordeformed, or in any way appear abnormal during use, recharging orstorage, immediately remove it from the device or battery chargerand stop using it.
16. In casethe battery terminals are dirty, clean the terminals with a drycloth before use. Otherwise performance may occur due to the poorconnection with the instrument.
17. Beaware discarded batteries may cause fire or explosion, tape thebattery terminals to insulate them.
UseGuide
1. when ithaven’t be use for a long time, execute the following procedure persix months to secure the power bank in good condition: firstly,charging the power bank to full capacity, use external devices todry out the capacity. Again charge it to 50% capacity of initial,then keep then in a cool and dry place.
2. A fulloperation of charge and discharge the power bank should be executedto make sure the inner battery cell on good condition.
3. Choosethe right model of adaptor to charge portable devices, anddifferentiates input port from output port.
4. Whencharge for the power bank, do not use it
5. Makesure the charge or output line isn’t connected to the power bankwhen it isn’t on conditions of work
Why FullSource
1. We arefactory-oriented company
2. Weprovide both aluminum lithium ion battery cell and lithium ionbattery pack
3. Wemanufacture products under quality control systemISO9001.2008
4. We haveexcellent R&D team support
5. We onlysell qualified products, battery cell or battery end products areall strictly tested and inspected before delivery.
6. Weprovide good services on pre-sale and also after sale
7. Nohesitate on reply and action
8. Weprovide OEM services
9. Wepromise 1 YEAR warranty
Trade terms anddelivery details
A. Samplesare available and fees caused by sending on your part
B. We dobusiness on the payment terms: Cash with order, T/T in advance,Western Union, confirmed irrevocable L/C
C. Ourquotation are all based on FOB Shenzhen, China or Hong Kong,China
D. Deliverydate: try order and small order often 10days upo receipt of yourpayment; heavy order often 20 days after receive yourpayment.
E. MinimumOrder Quantity: no less than 500 pieces.
Test reportCE/Pony
Factorytour
