Description:
Mediterranean Sea Sea of Marmara from the Black Sea port of CementClinker
CEMENT-ClinkER SELL TURKEY
Our company, cement, klnger, gypsum, iron, is a supplier ofconstruction materials.
GRAY CEMENT
Portland cement (PC 42.5 - PC 32.5) (CEM I 32.5 R - CEM I42.5 R)
Product description:
A hydraulic cement resulting from milling Portland cement clinker(TS 3441) together with gypsum. It comes in PC 32.5, PC 42.5, PC52.5 classifications. "PC" is the symbol for Portland cement whilethe numbers 32.5, 42.5, 52.5 indicate the minimum desiredresistance value achieved within 28 days.
Produced in compliance with TS 19 and EN 197-1 standards.
Areas of use:
PC 32.5 can be used in general-purpose construction to produceconcrete where the hydration temperature and effects of sulfur donot require that special attention be given. PC 42.5 and PC 52.5are used in construction works where highly resistant concrete isdesired or where concrete with a high initial resistance to shockis required.
Composite cement (KZC/A 32.5R) (CEM V/A(S-P-Q) 32.5 R)
Product description:
A hydraulic cement resulting from milling 40-64 parts (by weight)of Portland cement clinker (TS 3441) together with a correspondingamount (60-36 parts) of suitable additives and a quantity ofgypsum.
The Turkish Standard Institute (TS) number is 12142.
Areas of use:
Used in ordinary construction works and in making block concretefor which a low hydration temperature is desired.
Sulfur-resistant cement (SDÇ 32.5)
Product description:
A hydraulic cement resulting from milling Portland cement clinkercontaining at least 5% tricalcium aluminate together with aquantity of gypsum.
Produced in compliance with TS 10157 standards.
Areas of use:
Used in construction works in areas high in sulfates or affected byseawater; in underwater construction and in the construction ofbridges, dams, and harbor substructures; in the construction ofretaining walls.
Additive cement (KÇ 32.5)
Product description:
A hydraulic cement resulting from milling at least 81 parts (byweight) of Portland cement clinker together with a correspondingamount of pozzolanic additives (maximum 19 parts) and a quantity ofgypsum. The additives may be trass, slag, volcanic tuff, free ash,or other pozzolanics individually or several in combination.
Areas of use:
Used in general-purpose construction, in all areas ofconstruction not requiring early resistance, in the making of allforms of concrete where the hydration temperature and effects ofsulfur do not require that special attention be given (resembles PC32.5).
Portland composite cement (PKÇ/A- 42.5) (CEM II/A/M)
Product description:
A hydraulic cement resulting from milling 94-80 parts (byweight) of Portland cement clinker together with a correspondingamount of at least two kinds of additives (6-20 parts) and aquantity of gypsum. Its 28-day resistance must be at least42.5.
Produced in compliance with the TS 12143 standard.
Areas of use:
General-purpose construction in which additive cement is used andconstruction works requiring higher resistance.
Portland composite cement (PKÇ/A- 32.5 R) (CEM II /A/M 32.5R)
Product description:
A hydraulic cement resulting from milling 94-80 parts (byweight) of Portland cement clinker (TS 3441) together with acorresponding amount of at least two kinds of additives (6-20parts) and a quantity of gypsum. Its 28-day resistance must be atleast 42.5.
Produced in compliance with the TS 12143 standard.
Areas of use:
Used in general-purpose construction in which additive cement isused, in construction works requiring higher resistance, inconstruction works (such as dams) where a low hydration temperatureis needed, in places exposed to seawater.
Portland composite cement (PKÇ/B 32.5R) (CEM II /B/M 32.5 R)
Product description:
A hydraulic cement resulting from milling 79-65 parts (by weight)of Portland cement clinker (TS 3441) together with a correspondingamount of at least two kinds of additives (21-35 parts) and aquantity of gypsum.
Composition consists of 35% additives (trass, blast furnaceslag, limestone) and about 65% clinker. Its two-day pressureresistance should be more than 10 N/mm2. Its 28-day resistanceshould be more than 32.5 N/mm2.
Produced in compliance with the TS 12143 standard.
Areas of use:
Used in construction works were a low hydration temperature isrequired (such as dams), in places exposed to seawater, in normalconstruction works (since it is resistant to sulfates, chlorides,and other salts).
Pozzolanic cement (PZÇ/B-32.5 R) (CEM IV/B 32.5 R)
Product description:
A hydraulic cement resulting from milling 64-45 parts (by weight)of Portland cement clinker (TS 3441) together with a correspondingamount of pozzolanic materials (21-35 parts) and a quantity ofgypsum and CaSO4 2H2O.
Produced in compliance with the TS 12144 standard.
Areas of use:
Used in general-purpose construction works where additive cement isused.
Trass cement (TÇ 32.5)(CEM II/B-P 32.5 R)
Product description:
A hydraulic cement resulting from milling 80-60 parts (by weight)of Portland cement clinker together with a corresponding amount(21-35 parts) of trass (TS 25) and a quantity of gypsum.
The Turkish standards number is TS 26.
Areas of use:
Used in dam, foundation, and tunnel construction works because itis highly resistant to alkali, salt, and aggressive water; in blockconcrete construction works where the hydration temperature must berapid; in the construction of agricultural and industrialfacilities.
Blast furnace slag cement (CEM III/A 32.5 R)
Product description:
A hydraulic cement resulting from milling 20-80 parts (by weight)of Portland cement clinker (TS 3441) together with a correspondingamount (80-20 parts) of blast furnace slag and a quantity ofgypsum.
The Turkish standards number is TS 20. There are two grades,which are identified as CÇ 32.5 and CÇ 42.5.
