Description:
DIY ir multi touch framenormal TV become touch TV
use USB connect
usefull at home
CE, FCC, ROHS, ISO
46inch DIY ir multi touch frame for televisions at home
DIY touch TV, support all parts.
Ten-userswrite finger touch directly for operation; Stronganti-resistance to light, work directly under sunlight;
Intelligent gesture-recognition like zoom in or out thepictures;
Module design, simple combination, installation and parts exchangeafter sale actively;
Write by fingers
Thematerial is exquisite; adopt the aluminum as the material, flatterand more reliable. Make sure the longevity can reach 10years;
USB works as direct power supply, for users, it’s safe;
Can provide free software, and update for lifetime
Using our infrared touch frame can help reduce operating;can createvirtual meetings, video conference and collaborate on documents inreal-time, presentprojects or simply use as an computer.
The touch screen provides an all in one solution so you just needthe felt pen orfingers, clean the board and harmful to the health. A professional,cost-effective,environmental protection, healthy, safe, interactive, energyefficient sleek and
slim solution for any environment, easy to use the board andsoftware.
The ALUMINUM material offers a long lift product. The new 10touch pointstechnology provide to write directly onto documents, websitesand presentationsto illustrate, using our software can also convert writing to PDFquickly andeasily.
Available as either a Multi-Touch Interactive whiteboard or easychange to an Multi-TouchInteractive PC, just up to you.
Provides the board with additional accessories, don’t need thedirver and software.
DETAILEDINFORMATION:
frameType – Aluminum
frameColor- Black
Devicedriver version- DL-USB
DiagonalDisplay Area - 46”
Scanningform- Auto
DataPort - USB
Touchpoints – 2-10 touch points
ViewAngle - 178/178 (H/V)
Scale-16:9
ServiceLife - >10 years
Toucharea-1040.5(L) x 584.5(W)
Dimensions:1117.5 (L) x661.5(W) x 10 (D)
BoxDimensions: 1158(L) × 805 (W) x100 (D)
NetWeight: 7 Kg
GrossWeight: 12 Kg
InductionType infrared
WritingType finger or pen
PositioningAccuracy ≤0.2m
TouchPreciseness 8192×8192
CursorSpeed ≥125dots/second
TransferringRate 12m/s
ScanningRate first point 25ms consecutive points 8ms
ConsumptionCurrent <1W, USB 5V voltage, current ≤ 100mA
OperatingVoltage DC 4.6V ~ DC 5V
WorkingEnvironment 1.Operating Temperature:-10 °C- 45 °C
2.Operating Humidity:20% -85%
3.Altitude:3,000m or below
4.Underdaylight, indoor & outdoor environment
TouchSpot LifeSpan Over 60, 000, 000 times single spot touch
ACCESSORIES:
WallMount
OperatingInstructions & Quick Start Guide
Apointer
SoftwareCD
2 xfelt Pen
6M USBcable
Movestand(optional)
WARRANTLYTIME
Theinteractive touch screen with 3 years warranty time whilst all PCBfor interactive whiteboard come with advanced replacement warrantyas standard for 3 years, which means if there is a problem and wecan’t fix it you’ll get a replacement straight away.
The step to DIY touch TV:
1. Fine a 4mm normal glass for55inch. Then cut it into the shape of our requirements, Each cornerneeds to cut an equilateral triangle of variable length is 68mm.
2. In the accessories bas, youwill find four fixed items to fixed the glass , and this gelatinsponge. Put the gelatin sponge with four fixed items like thepictures.
3. Remove the total of 16 screw of four corners.
4.Put the glass on the touch frame, then put the fixed item withgelatin sponge on the glass, then install the screw like thepicture.
. All four corner do like this, and the whole picture asbelow.
5.Install the hanging like picture. The upper two Angle like this,then put the other hanging item like the picture and installthe screw. , The effect of the installed as like thepicture.
6. The lower two Angle as like the below picture and do like thestep.5. The effect of the installed as like thepicture.
7. All step are finished, the effect picture as blew.
