Description:
FRP panel *strong, high impact*good weathering
*thermal stability
*water tight
*durable, no deformation
Smooth Flat or Pebble Embossed FRP Fiberglass Panel forRV, Commercial Truck , Cold Room, Clean Room
Jinyi fiberglass Door Skin panels are made from high qualitythermoset polyester resins with U.V. inhibitors and have a Class Cfire rating. The surface is available with a textured embossed orsmooth finish that is aesthetically pleasing. Panels are suitablefor use as a permanent exterior that may be exposed to the elementsin a wide variety of climates.
The special benefits of the material here are its low heatexpansion and excellent water-repelling properties. Doors will notwarp due to temperature influence or moisture absorption. Jinyi FRPdoes not absorb moisture.
Table One: PhysicalProperties | |||
TypicalValues | |||
Property | SDSC | 0.045" | SDSC | 0.055" | Test Method |
Flexural Strength | 25 x 10 psi 172 MPa | 30 x 10 psi 207 MPa |
ASTM - D790 |
Flexural Modulus | 0.75 x 10 psi 5171 MPa | 0.75 x 10 psi 5171 MPa |
ASTM - D790 |
TensileStrength | 13 x 10 psi 90 MPa | 13 x 10 psi 90 MPa |
ASTM - 638 |
TensileModulus | 0.85 x 10 psi 5861 MPa | 0.85 x 10 psi 5861 MPa |
ASTM - 638 |
Barcol Hardness |
40 |
40 |
ASTM - D2583 |
Impact Strength (IZOD) ** | 10 ft-lb/in 0.53 J/mm | 8 ft-lb/in 0.43 J/mm |
ASTM - D256 |
Coefficient of Linear Thermal Expansion | 1.6 x 10-5 in/in/°F 29 μm/m/°C | 1.6 x 10-5 in/in/°F 29 μm/m/°C |
ASTM - D696 |
WaterAbsorption |
0.3%/24 hrs@77°F |
0.3%/24 hrs@77°F |
ASTM - D570 |
Conductivity (K Factor) | 1.2 BTU • in/hr/ft /ºF 14.9 kcal • cr/hr/m2/ºF | 1.2 BTU • in/hr/ft /ºF 14.9 kcal • cr/hr/m2/ºF |
ASTM - C177 |
Smooth Flat or Pebble Embossed FRP FiberglassPanel for RV, Commercial Truck , Cold Room, Clean Room
