Description:
capacitive touch screen1.CE , RoHS compliance
2.Life Time:>1, 000, 000 times
3.no drift, fit for precision
Specifications
capacitive touch screen
1.CE , RoHS compliance
2.Life Time:>1, 000, 000 times
3.no drift, fit for precision
Capacitive TouchScreen
Character
1.CE , RoHS compliance
2.Life Time:>1, 000, 000 times
3.no drift, fit for precision
Parameter
| 1.Structure | G G |
| thickness | 1.45mm adjustable |
| Connection of TSP and IC | COF or COB |
| Haze | ≤2.5% depends on the quantity of layers |
| 2.Operating Voltage | 3.3V adjustable |
| 3.Operating Current | 2.5mA-10mA Depends on IC |
| 4. Interface | ≥20MΩ (25V DC) |
| 5.Linearity | I2C, USB |
| 6.Transparancy | ≥80% depends on the quantity of layers |
| 7.Surface Hardness | ≥ 5H |
| 8. TSP ESD Level | ≥ 100 000 000 Times |
| 9.Operating Temperature | -20°C~40°C , <90%RH ; 40°C~70°C, <60%RH |
| 10.Storage temperature | -15°C~40°C , <90%RH;40°C~70°C,<60%RH |
| 11.Size range | 1.8" ~ 23" |
Productdescription
1 .9.7" Touch Screen Panel;
2. Capacitive touch screen;
3. Customized;
OpticalSpecifications
| Transmittance |
To 550 lumens of light intensity up to 88% lighttransmission;
|
based on the specific choice of surface finish may be.
| |
Use of equipment: BYK Gardner Haze Gard Plus
| |
| Surface Treatment |
Industrial and Polished etch may also apply to surface touch.True etch only touch the surface. True AR only for flat touchscreen.
|
| Coating |
ClearTek is a protective glass coating, through its anti-scratchprotection and enhanced durability of the sensor.
|
MechanicalSpecifications
| Linearization |
Factory linearization values are stored in the touch screenNOVRAM or add the controller or 2D bar code.
|
| Touch contact requirements |
Enter your fingers continued 3ms.
|
| Glass thickness |
0.125 inches (± 0.01 inch) / 3.18 mm (± -0.25 Mm) typicalthickness. (only the glass thickness, not including tape, wires andsolder, if used).
|
Size and shape |
Offers hundreds of surfaces (spherical and cylindrical) andplanar dimensions. Custom sizes are also available.
|
| Scratch the surface hardness |
Mohs hardness factor of 6.5 or less without any stylusscratches. Exceed MIL-C-675C demanding wear test. Balance BeamScrape Adhesion Mar tests can withstand 10, 500 grams of force.MicroScratch tests to 10 micron radiation with thin tungsten carboncompound material of the cutting device can withstand the power ofNewton 1.8.
|
NEMA coefficient
| NEMA logo can be marked. |
| Washer |
Completely waterproof washer can be used polyethylene gasketseal. To obtain additional information, check the sensorintegration guide.
|
| Clean |
Water, isopropyl alcohol, and similar non-abrasivedetergent.
|
