Send Inquiry
Description:
1. DOT 1/8 HL SAEJ1401 BRAKE HOSE2.ISO/TS16949
3. Delivery time:25 days
4.100% test before shipment
5. Factory Guarantee"
| SAEJ1401 Auto Car Parts Brake Hose | |||||
1. DOT 1/8 HL SAEJ1401 BRAKEHOSE
| |||||
| Brake hose structure according to the material: | |||||
| 1. EPDM/PET/(NBR/SBR)/PVA/EPDM | |||||
| 2. EPDM/PVA/(NBR/SBR)/PVA/EPDM | |||||
| No | Standards | Feature | |||
| 1 | SAE J1401, DOT , GB16897 | 1, Goodflexibility bursting resistance 2, High tensile strength 3, Low swell increment of the internal volume 4, Ozone resistance 5, Low temperature 6, Bending resistance 7, Good compatibility 8, Safe and reliable braking effects | |||
| 2 | GM6403M, GMW3056 | ||||
| Brake Hose Specification | |||||
| No | Specification | Standards | Feature | ||
| ID | OD | SAE J1401, GB16897 SAE J1401, GB16897 | Super lowexpansion - Ageingresistance - Long life( it runs 80, 000 km in 2 years with good quality) | ||
| 1 | 3.2mm±0.1 | 10.5mm±0.1 | |||
| 2 | 4.8mm±0.2 | 13mm±0.3 | |||
| 3 | 6.3mm±0.2 | 15mm±0.3 | |||
| Producing technological process: | |||||
| Rubber brakehose: The inside rubber squeeze out --- Twine --- The outsiderubber squeeze out --- Cooling ---Cut | |||||
| hydraulic Brake Hose Spec : 3.2MM X 10.5MM, 3.2MM X 12.5MM, 4.8MM X 12.5MM Standard: SAE J1401 Brake fluid: DOT3, DOT4, DOT4 Material: Tube: EPDM, perfectly resist oil, heat and permeation of water. Reinforcement: Made of high strength polyester fiber treated byspecial resin. Cover: EPDM, perfectly resist heat and ozone. Middle Layer: By using viscosity-strengthen middle rubber betweenreinforcements to provide high dynamic capability. Feature: Low inner cubage expansion; Resistance of heat and ozone; Low moisture permeation, whip and impulse; Working temperature: -55°C to125°C; Burst pressure: >60Mpa. | |||||
