Description:
1.LPR camera Intelligent White LED 700TVL CCD Analog highwaywaterproof LPR cameraCamera2. With 5-50mm auto Iris Lens
LPR cameraIntelligent White LED 700TVL CCD Analog highway waterproof LPRcamera
High Resolution LPR Camera for high Way, ParkDescription:
This camera integrates advances inoptics, electronics, IR illumination and ambient rejectiontechnology to
deliver consistent, reliablenumber plate capture in the most challenging of conditions. With anoperational
range of up to 60m, it delivers high contrast numberimages across the complete spectrum of ambient lighting
conditions.
Thecamera can capture clear plate images from vehicles moving atspeeds of up to 120km/h enabling
effectivecapture on motorways, highways and in other highspeed applications. The unit housing is weather-
sealed and field proven for successful application inextreme environments.
HighResolution LPR Camera Features:
** 1/3” SONY super HAD IICCD, and new ISP solution design.
**High resolution700TVL(color).
** Monocrystalline and highenergy IR LED array features less heat, high brightness andefficiency with several
timeslife period than normal IR LED.
** Digital WDR function canrecognize both shadow and highlight object in some backlightscene. Digital noise
reduction can reduce the noise in low light. Shutter speedadjustable, good for different vehicle speed
monitoring.
** 5-50mm auto iris lensfor different distance application.
** Park line guide andhorizontal mirror for rear-view camera application.
** Removable IR filter canget good image at daytime, and improve the license plate capturingeffect in low light
atnight.
** DC12V/AC24V dual powersupply design. And this design can effectively avoid surge andinterference from
powersupply with multi kinds of protection (optional model)
** Local OSD menu and RS485remote control functions are very convenient for construction andinstallation.
** 5 seconds time delay forLED on and B&W image to avoid the interference due to theambient light changing
frequently.
** LED brightness and CDSstart time can be adjusted for different ambient light anddifferent vehicle speed
application.
** Built in fan and heaterto work well in different environment.
HighResolution LPR Camera Technical Specification:
| Product name | High Resolution License Plate Capture Camera |
| Video system | PAL/NTSC |
| Sensor | 1/3” Sony Super HAD II CCD |
| Pixel | PAL: 976(H)×582(V); NTSC: 976(H)×494(V) |
| Resolution | Color:700TVL |
| Video output | 1.0Vp-p/75Ω Video composite video signal |
| Control mode | OSD/Remote RS485 |
| SNR | 50dB (AGC OFF) |
| Illumination | 0.1Lux/F1.2 |
| DNR | 2D |
| Gamma correction | 0.45 |
| White balance | ATW/AWB/MANUAL |
| H-Mirror | On/off |
| IRLED | 4pcs Monocrystalline and high energy IR LED array , 60mdistance |
| Lens | 5-50mm DC lens |
| Electronic Shutter | PAL:1/50~1/120000 sec /NTSC:1/60~1/120000 sec |
| Power Supply | DC12V or DC12V/AC24V±10%, 1A at DC12V(Max) |
| Work environment | -20°C~60°C, 20%~90% RH |
| Temperature control | Heater works at –5°C, fan works at45°C |
| Dimension | 420x147x101(mm) |
LPRCamera Interior Picture:
60M IR LPRCamera Function:
1.Lens adjustment: Focus far and near operationin FAR and NEAR flag deflector rod, and fasten it after the focusselection.
Zoom wide and tele operation in WIDE and TELE flagdefector rod, and fasten it after the accurate focus.
2.IR LED brightness adjustment: based onactual application factor , such as headlight illumination ofvehicle, license plate
reflecting rate, vehicle speed, ambient light illumination,installation angle and distance.
Proper LEDbrightness can avoid over exposure and lack of exposure in thelicense plate area
to get the clear image. Anticlockwise rotating from rear partdirection with screwdriver will
increase brightness, on the contrary, the brightness will decreasein the clockwise direction .
Especially,if the LED illumination built in housing is not enough for theapplication, the exterior
IR light resource need to be added.
3.CDS start time adjustment: The operationdetermine the expected ambient light brightness in CDS location tostart LED light.
Note: 5 seconds time delay for avoiding the light switchinginterference, please wait for several
seconds for the work when testing.The earlier start time will do ifanticlockwise rotating from rear
part direction with screwdriver , on the contrary, the clockwisedirection will work later.
4. Local OSD menu button in camera rearpart, the menu option adjustment refers to menu settinglater. After these operation,
fastenthe latch. It’s recommended to fasten the latch by screw in orderto avoid unprofessional
disassemblyon housing.
5. Exterior interface and connectionsketch
LPR Camera Cable ConnetorPicture:
Car License Plate CameraApplication:
Install the camera over the driveway, theoptimization distance is not more than 30m, as right diagram, andavoiding the
halation of headlight and sunlight directlyshooting the camera is the height and angel requirement The actualinstallation
foreach driveway must be concerned, the principle is as far aspossible made license plate relatively long trip inthe
video, which will help identify the back-endprocessing.
ImagePicture Quality:
CarLicense Camera Package:
Accessories:
JindingSecurity Co Limited Factory Information:
Jinding SecurityCo Limited Professional Certification:
Why ChoiceJinding?
1. StrongTechnology and sales team support.
2. StableQuality.
3. Professionalpackage and service
4. Fast Deliveryand Low shipping cost.
5.Quality Warrantyis 5years.
