Description:
1.positioning system sensor1.Rod diameter:80mm
2.Bore:180mm
3.Stroke:832mm
Main datas of Heavy duty truck positioning systemsensor
CylinderSpecification
| Model | PistonRod DIA(mm) | CylinderInner DIA(mm) | Stroke(mm) | Weight | RetractedCylinder Length (eye to eye) | Workingpressure |
| KRM 183cylinder | 80 | 180 | 832 | 118kg | 1140mm | 11.8Mpa |
HoistMechanism Dimensions
| Length(mm) | Width(mm) | Height(mm) | Min.ClosedLength(mm) | Weight(kg) |
| 1740 | 592 | 541 | 1180 | 464 |
Hydraulic pump kp-1405A
| StandardRevolution(rpm) | 800 |
| DischargeVolume(ml/rev.) | 136 |
| Max.TestingPressure(Mpa) | 20.6 |
| Mass(kg) | 37 |
Hoist Mounting and Maximum LiftingCapacity
Recommended Truck G.V.W.(kg) | Body Length L(mm) | Rear Overhang R(mm) | Distance between Load Center toHinge D(mm) | Distance between trunnion to Hinge T(mm) | Rated LiftingCapacity(kg) | Designed Max.liftingCapacity (kg) | ||||||
21, 000 to 29,000 | 5,300 | 900 | 1,750 | 2,480 | 15, 000 to 17, 000 | 53º | ||||||
| 27000 | ||||||||||||
ReferenceDatas for KRM Series Hydraulic Cylinder:
(We also produce custom madeHydraulic Cylinder according to your specificrequirments)
| Model | Cylinder Inner HoleDiameter(mm) | Piston RodDiameter(mm) | Stroke(mm) | Lifting Capacity(Ton) |
| KRM-92 | 160 | 45 | 405 | 4-5.5 |
| KRM-143A | 140 | 60 | 530 | 6-9 |
| KRM-160S | 160 | 70 | 604 | 8-11 |
| KRM-160C | 160 | 70 | 794 | 6-8 |
| KRM-183 | 180 | 80 | 832 | 21-29 |
| KRM-201 | 200 | 100 | 878 | 25-32 |
| KRM-220(48") | 220 | 100 | 1123 | 18-25 |
| KRM-220(68") | 220 | 100 | 1620 | 20-29 |
We can offer the completed KRM183 hydrauliccylinder system
Advantages of ourproducts :
1. Using new rolling technology to ensure highprecision for the inside hole ofcylinder
2. Thethickness of cylinder is up to 16mm, it can meet the strengthrequirement when the truck is overloaded
3. Using 3 seal-rings to seal piston rod , it canbe lifetime used
Quality Control:
1.Cylinderproducts have to pass strict quality control from purchasingmaterials, processing, assembling . (We passed the certification ofISO/ TS 16949:2009)
2.Automatedcleaning equipment to ensure the cleanliness of fuel tankassembly.
3.Weldingwith CO2 arc and automatically girth welding, which can ensure thewelding quality of the sealparts
4. FullCylinder inspection, all products need to100% pass thecomprehensive test before deliver out fromfactory.
Welcome tocontact with us for more information
