Description:
Newly developed Bi-component micro-fiber Melt-blown thermalinsulation has the superior property of light, thin, fluffy,elastic,
TDM-III Series TEDA Themal insulation meets the standard GB18401-2003( The National General Safety Technical Code for TextileProducts). The material is safe to be used touching peoples skindirectly. It is an absolute green product.
This product has a bi-component structure, blended by polyesterand polyolefin fine denier fibers, which can retains its insulatingability in damp conditions and dries quickly and easily. Itfeatures light, thin, soft, high thermal insulativity, washable,compressible, damp-proof and can provide a high breathability.
product code |
Basic weight | ¹ Thickness |
Thermal Insulation Efficiency | CLO Value |
Application |
g/ | Mm | % | |||
TDM-III-35 | 35 | 2.6 | 51 | 0.65 | Glovessleepwear |
TDM-III-60 | 60 | 5.2 | 58 | 0.85 | Sleepwear long underwear footwear |
TDM-III-80 | 80 | 5.5 | 63 | 1.06 | Jacket footwear |
TDM-III-100 | 100 | 6.3 | 72 | 1.52 | Jacketouterwear |
TDM-III-120 | 120 | 8.6 | 75 | 1.7 | Quilt in air-conditioned room |
TDM-III-150 | 150 | 9.5 | 79 | 2.27 | over coat/outerwear |
TDM-III-200 | 200 | 12.5 | 81.5 | 2.65 | Quilt /overcoat/bed sheet |
Note:1. Tested under pressure at 0.002PSI(1.37×10-3N/cm2 ) :1.0.002PSI(1.37×10-3N/cm2 ).
l Width available:1.5meters (60inches) 1.5
l Material Composite:PP 65% / PET 35% PP65%/PET35%
l Hydroscopicity: <1% 1%
l TDM-III ,.100mm150mm.
Use form: TDM-III can be directly used to laminated with otherfabric to produce garments; and also can be available in forms thatwe laminated Spunbond scrim of one side or both sides of theinsulation . The press point distance is 100 or 150mm.
Patented product, desirable and comfortable for wearing, hasbeen designated for the Peoples Liberation Army.
