Brand:SHAMO
MOQ:5
Quantity:2
DC InverterCO2 Mig Welding Equipment(NBC-350)
Technical parameters:
Parameter | MODEL | ||
NBC-350II | NBC-500II | NBC-630II | |
Rated Input Voltage(V) | AC380±10% 50/60Hz(3 Phase) | ||
Rated Input Capacity(KVA) | 14.4 | 25 | 35.8 |
Rated Input Current(A) | 21 | 37 | 54 |
Load Duty Cycle(%) | 60 | ||
Output Current Range(A) | 60~350 | 60~500 | 60~630 |
Output Voltage Range(V) | 12~40 | 15~50 | 15~50 |
Output Idling Voltage(V) | 58 | 70 | 70 |
Efficiency(%) | ≥89 | ||
Power Factor | ≥0.9 | ||
Diameter of Welding Wire(mm) | ---- | Φ1.0~Φ1.6 | Φ1.0~Φ2.0 |
CO2 Gas Flow(L/min) | 15~20 | ||
Transformer Insulation Grade | H | ||
Output Reactor Insulation Grade | B | ||
Safeguard Grade | IP21 | ||
Weight(kg) | 43 | 53 | 60 |
Dimensions(mm) | 625×320×515 | ||
Features:
1.Use the VMOS high frequency inverter technologyand inverter frequency
reaches 100KHZ, quick dynamicresponse;
2.Use strong impulse to initiate arc, high arcinitiating success rate, stable arc, less spray, beautiful weldingseam;
3.Adopt special control way, output current isconstant, strong ability to rsist the voltage fluctuation and thewelding environment disturbance. Good arc self-regulationperformance and steady welding process;
4.Well-designed protection circuit, safe andreliable, easy to search malfunction;
5.High efficiency, energy saving, high load dutycycle, no noise in the arc weld rectifier;
6.Smooth arc ending region;
7.Reasonable structure, convenient for repair.
DC Inverter CO2 Mig Weldingmachine(NBC-350)




