Brand:Cometech
burst strength tester
This Bursting Strength Tester uses oil pressure to breakspecimen through rubber film. This tester is used to test thebreaking strength of paper, leather, textile etc.
Model No. | QC-115/QC-115A | QC-115D/QC-115E | |
Capacity | 20/50/100 kgf/cm2 (able to select 2 gauges) | 0.5~ 100 (kg/cm²) | |
Specimen Fixing Pressure indicator | Pressure gauge | Pressure gauge | |
Breaking-Strength Indicator | Remaining needle | Electric LED light up to | |
Pressure | Electric oil-pressure | Electric oil-pressure | |
Specimen tighten indicator | Pressure Gauge (Able to preset tightenstrength) | ||
Hydraulic oil requires | glycerin 85%, distillation water 15% | ||
Testing Speed Selection (cc/min) | 170 ± 20 high pressure/speed | Upper/ Lower disc inner: φ31.5mm ± 0.05 | |
95 ± 10 lowpressure/speed | Upper disc inner: φ30.48mm ± 0.05 Lower disc inner: φ31.75mm ± 0.05 | ||
Outer disc | Upper :φ100mm Lower: φ108mm
| ||
Power supply | Single phase, 110V/60Hz or 220V/50Hz | ||
Accessory | Rubber film, Aluminum foil paper for calibration,Wrench, Operation Manual | ||
Dimension | 53×40x50 cm | 57×53×50 cm | |
Weight | 65 kg | 63 kg | |
Cometech QC-115A burstingstrength tester
