Brand:gandong
1.Designedto break up alluvial gravels,clays,sand
2.Highcapacity and high power scrubbing
3.Canaccept material up to 230mm
Theslurry material feeds into the drum where it is vigorouslyscrubbed, the soil matrix is broken up and the target mineral isreleased. The material is then screened through the rotating screenand waste is ejected. The screened material is then passed on tothe concentrating modules for upgrading.
Features
1.Designedto break up alluvial gravels, clays and sand
2.Highcapacity and high power scrubbing
3.Thelong drum of the scrubber retains material for longer, morevigorous washing for complete separation
4.onehigh output electrical motor driving a gear system providingefficient torque
5.Adjustablerotary speed
6.Thewater with high pressure flushed the inwall of drum
7.Canaccept material up to 230mm
8.Mechanicalsealing of inlet chute – minimal spillage when overfeeding
9.Driveloads absorbed within the drive frame and pivoting drive framedesign – Foundations only have to support vertical load and are notcritical for alignment ie minimal cost
10.Shelldesign less mass than conventional roller supported units –installation craneage requirement reduced
Descriptions
Therotary scrubber is an autogenous rotating drum scrubber, utilisingpebbles and rocks within the feed source to fracture anddisintegrate clays, agglomerates and soft oxides. Disintegratedmaterial is homogeneously slurried within the drum, whilst theautogenous load is retained within the drum by reverse flightslocated at the drum discharge end. Slurry and washed oversizeoverflows the drum discharge throat to the concentric exittrommels.
Thescrubber spins slowly, similar to a giant washing machine. Itchurns the fines and oversize and water together, vigorouslybreaking up the soil matrix as well as liberating the targetmineral from tough clay, schist''s and rock.
Afterthe fine (soil) is separated, the material is moved into thescreen. The rotating screen separates the oversize material fromthe fines (the fines are usually termed or categorized into lessthan 8mm). Most of the freely (gravity) recoverable gold and orother recoverable mineral is contained in the – 8mmfines.
Thismaterial is then passed on to the downstream process equipmentwhich can be in various forms such as centrifugal Concentrator,spirals, jigs etc.


