1. Hydraulic / Mechanical ram, synchronised positive stopdesign, ram stroke controlled by precision mechanical nut depthstops built into each cylinder. Electronically controlled by ENC-18Programmable digital controller assuring accuraterepeatability.Parallelism is ensured by torsion bar that can beeasily adjusted by clutch system.
2. New style Digit type manual crowning conveniently mounted on theright side of the bed enabling operator to adjust simply byrotating the dial whilst the analogue digit system indicates theamount of movement
3. Segmented heavy duty 86° offset top punch is segmented forreturn bend clearance and incorporates a safety key to stop punchdropping.
4. Multi vee (''V'') bottom die is made from solid die block designto handle heavy plate, safety edge vee (''V'') is incorporated inbottom die block.
5. Conveniently mounted control box on pendant for quick swivel andadjustments.Enclosed rear gate with micro safety switches completewith sliding rear door for easy access.
6. Sliding steel fabricated sheet supports enabling a wide range ofmaterial sizes to be aligned and supported at the correct requiredheight. This feature is achieved with a ‘T’ slot machined down thetotal length of the die bed; sheet supports are also adjustablevertically to assist in supporting material with return bendsalready folded.
7. Adjustable sliding blocks control the machines beam to providedesirable open height distance to the (slow speed) mute bendingpoint. Operator adjustable locking knobs for quick adjustment,enables accurate repeatability and increased productivity.
8. metal safety guarding surrounding the machine with rear slidingdoor fitted and micro switch ensuring operator safety. Clear accesspanels placed at each end of machine allows the operator to clearlyview tooling and work piece during bending operation. metal masterspecially design gates to suit safety requirements.
9. Hydraulic MPA pressure gauge mounted on right side of supportframe with quick adjusting pressure control knob allowing operatorto accurately set the pressure required for different materialthickness, incorporating with hydraulic overload protection.
10. Welded steel fabricated synchronised torsion bar horizontallysupporting main bending beam to provide consistent parallelism thatalso can be adjusted for taper correction. The vertical supportingslides are treated to provide greater ware resistance and increasedaccuracy.
11. Reinforced side frames providing addition support strength tomachine throat