Function and Features
1 Single drum former device. Crusher can take both treated anduntreated fluff pulp.
2 Fluff pulp feeding is controlled by servo motor. Or air laidpaper can be used instead of fluff pulp to produce high qualitypads.
3 SAP feeding device. SAP is added mixed with fluff pulp andcontrolled by servo motor. If use air laid paper to instead offluff pulp, then SAP feeding device can be used as sparedevice.
4 Tissue paper double sides feeding units. If use air laid paper toinstead of fluff pulp, then tissue paper is unnecessary to use.
5 Net shape pressing device. Cylinder pressing.
6 Fluff core or air laid paper position adjusting device
7 Fluff core or air laid paper cutting device. Cylinderpressing.
8 Bottom film and top sheet materials feeding unit, Glue adding andfixing shape by pressing.
9 Pad vertical folding
10 Wastes rejection device
11 Pad crosswise folding
12 Auto-counting and arrange coming out. (The main machine can linkwith stakcer machine to do automatic packing. )
Technical Parameters
1 Model: JWC-CFD-SV
2 Designed speed: 250 M/Min
3 Real production Speed: 200 M/Min
4 Product size: L: (350-1500)mm x W(300-900)mm
5 Qualified rate: 99.99% (The rate is compared with qualifiedproducts with gross output products within7.5 hours)
6 Efficiency: ≥ 90%(The rate is compared real output with principleoutput within 7.5 hours)
7 Installed capacity: 200KW(Including hot melt system)
8 Practical capacity: 140KW(Including hot melt system)
9 Electric power supply: Three-phase & four-wire380V/50Hz(Ground wire)
10 Electric wire: 3x95mm2 1x25mm2 1x16mm2
11 Air compressor: >0.6Mpa, 1.8m3/min
12 Weight: about 70T
13 Noise:
14 Machine size: (25x8x4)M
15 Working size: (29x10x5)M
16 Container: 3x40HQ 1x20GP