SILIKE silicone gum is an ultra high molecular weight PDMS (Polydimethyl Siloxane ) with low volatiles content . It is designedto be used as an additives for thermoplastics for improveprocessing properties, including resin flow ability, better mouldfilling , less extruder torque, internal lubrication, mould releaseand faster throughput. Meanwhile, better surface quality can beexpected too. Like lubricity , slip , lower coefficient offraction, anti-scratch resistance and greater Mar and abrasionresistance . Except used as an additives , it can be alsoincorporated into thermoplastic resins preferably by batchtechnologies. Product data: Property Value Color ColourlessVolatile content 1~2% Features Lower materials surface energyImproving the processing properties, less extruder torque, reducedequipment wear, better mold filling and reduce product defect rate.Obvious lower the coefficient of friction (COF), improve surfacesmoothness, gloss, enhance the surface silk texture, scratch andabrasion resistance. Enhanced fuel resistance, reduced smokedensity, improve the impact strength . Good stability,non-migratory . Recommend dosage Addition level at 0.1%to 1%, canimprove the product’s processing, liquidity and mold release. At ahigh level: 1% to 5% can improve the surface properties(smoothness, scratch resistance and abrasion resistance). Transportand Storage Non- dangerous goods . Moisture and excessive exposureshould be avoid during transportation . 12 months shelf life forfull package .Storage beyond the date specified on the bag notnecessarily mean that the product is no longer usable. In this case, However, the properties required for the intended use must bechecked quality assurance reasons .