Office Supplies
beer brewing fermenting equipment
2016-11-15 22:52  Views:154
Price:Negotiable
Send Inquiry
Material:
stainless steel AISI 304
thickness: 3mm
Inner surface treatment:
cold-rolled plates , 2B surface treatment, welds

Material:
stainless steel AISI 304
thickness: 3mm
Inner surface treatment:
cold-rolled plates , 2B surface treatment, welds grinded to Ra0,8µm.
External surface treatment:
cold-rolled plates grinded to SB
Cooling:
Cylinder: 3 cooling-sections
Conical bottom : 1 cooling-section
Working pressure in cooling-sections - 1,5 bar
Insulation:
Polyurethane - thickness 150 mm, density 1,09 g/cm³:
both cylinder and conical bottom
External-Jacket:
Stainless steel plate - thickness 1,5 mm, both cylinder and conicalbottom
Working pressure:
1,5 bar in cylindrical-part (filled-up tank, at 20°C)

Functions:
Fermenting tank is a vertical vessel for fermentation andmaturation of beer. Aerated, cooled down wort to fermentationtemperature is transferred to these tanks and then yeast is added.about 2 hours after yeast is added to wort, yeast uses up all freeoxygen and begins to transfer sugars contained in wort intoethanol, CO2 and heat. Main fermentation proceeds at 9 - 12°Ctemperature and is completed within 5 - 7 days. Then it isnecessary to lower the temperature to 4°C. During fermentationprocess, yeast and minute particles settle down in the cone and therecommendation is to remove this sediment daily. After fermentationfollows maturation at temperature of 0 to -1°C, beer absorbs CO2,matures in taste and fragrance. The whole process of fermentationand maturation lasts 16 to 20 days.
Description:
Stainless steel, vertical, double-walled, insulated, 60 degree conebottom, dished head, beer fermentation tank.
Cylindrical and conical parts have independent glycol cooling zonescontrolled by temperature sensors and solenoid valves.
Part of dished head forms oval man way door, safety valve set up at1.5 bar and sanitation sprayball. Spunding device controlling CO2level is mounted on the inlet pipe. On the bottom end of tank issampling cock for taking beer samples. Conical part has bottomoutlet yeast removal pipe and outlet for beer transfer to servingtanks. Vessel is supported by 3 tube legs with fully articulatingadjustable feet. Tank is also equipped at the top by 2 cable eyesfor easier manipulation.

Contact Infomation
Send Inquiry
Company name:Jinan Deyu Machinery Equipment Co., Ltd.
Status:[Offline] [Send message] [Chat]
Business contact:Chunjiang Yang(Ms.)
Telphone:
Mobile:
Fax:
Area: Caribbean Region-Bermuda
Address:No.68,Dingzhuang Industrial park,Tianqiao,Jinan