MOQ:1
Quantity:30
Send Inquiry
plastic blow molding machineInjection molding machine
1.Big tie bar space and shot weight capacity
2.Most famous component parts
3.Perfect after-service
| INJECTION UNIT | FL 70 | ||
| Screw soecification | A | B | C |
| Screw diameter (mm) | 30 | 32 | 35 |
| Screw stroke (mm) | 140 | 140 | 140 |
| Screw L:D(L/D) | 23.4 | 22 | 20 |
| Shot volume (cm³) | 99 | 113 | 135 |
| Shot weight PS(g) | 89 | 101 | 121 |
| Injection pressure(Mpa) | 216 | 190 | 159 |
| Dwell pressure(kgf/cm²) | 2203 | 1936 | 1619 |
| Injection speed(mm/sec) | 90 | 90 | 90 |
| Injection rate(cm³/sec) | 64.4 | 72.3 | 86.5 |
| Screw rotate speed (rpm) | 210 | 210 | 210 |
| Nozzle sealing force(KN) | 30 | ||
| Nozzle advance stroke(mm) | 0.87 | ||
| Heater power (KW) | 6.2 | ||
| CLAMPING UNIT | |||
| Clami force (KN) | 700 | ||
| Toggle stroke(mm) | 265 | ||
| Space between tie bars(mm) | 305x305 | ||
| Max.mould height(mm) | 320 | ||
| Min.mould height(mm) | 125 | ||
| Ejector number(pc) | 1 | ||
| Ejector force (KN) | 27 | ||
| Ejector stroke(mm) | 80 | ||
| OTHERS | |||
| Special pump pressure(Mpa) | 16 | ||
| Standard pump pressure(Mpa) | 14 | ||
| Machine dimensions(LxWxH) m | 3.8x1.15x1.6 | ||
| Machine weight(T) | 2.6 | ||
| Oil tank capacity(L) | 160 | ||
| Pump motor power(KW) | 9 | ||
| A | B | C | D | E | F | G | a | b | c | d | e | f | g | |
| FL70 | 270 | 125 | 30 | 210 | 100 | 3 | 10 | 2920 | 3800 | 1600 | 1150 | 875 | 1420 | 30 |
