Brand:OEM
MOQ:500
Quantity:10
Send Inquiry
Piping kits series for Air Conditioners
[ Heat Resistance: 120°c ]
All product of this series are insulated by PE foam with heatresistance up to 120°c and used for both heating and cooling.Al tube is soft-annealed for flexibility and easy work. The surfaceto ensure high sealing performance, against gas leakage. Flare nutsare also annealed to prevent cracking. This product serieseliminates the necessity of troublesome setup work, promising easyand quick installation, as well as easy maintenance.And the cost ismuch lower than the copper pipe and Al-cu pipe.
| Comparison | Al pipe | Al-cu pipe | Cu pipe |
| S.G (g/cc) | 2.71 | 3 | 8.9 |
| Pressure resistance | >4.3Mpa | <4.3Mpa | >4.3Mpa |
| Tensile strength | 110N/mm2 | 60-100N/mm2 | 233N/mm2 |
| Allowable stress | 24N/mm2 | -- | 33N/mm2 |
| Elongation % | 40 | 54 | 45 |
| Heat conductanceca/°c.cm.sec | 0.5 | 0.6 | 0.9 |
| Bending strength | Slmillar Copper | softer | |
| Cutting | Yes | No | Yes |
| leakage possibility | No | Yes | No |
| Bending position | Any | Not any | Any |
| corrosion resitance | enough | not | enough |
| heat loss | small | midium | large |
| Cost | economical | midium | high |
| Recycle | easy | difficult | easy |
1/2"x 3/4" Insulated Al pipe kits for air conditioner




