Blister Packaging, The clear plastic thermoformed blister ismost often combined with a printed card which has a heat-sealcoating so the plastic blister can adhere to the card. Sometimes inplace of the printed card, foil, plastic or laminated materials arebonded to the pre-formed blister. If this style of package weretampered with, it would be obvious thus the blister package is avery popular style when a product must remain secure for the enduser. These are commonly used for pharmaceutical products, butmany, many general consumer goods use this economical and effectivepackaging style.
Material Thickness
Blisters are manufactured from material thicknesses ranging from.007 inches to. 047 inches.
Materials
PVC, PS, PETG, and PET are the most commonly used materials.
about all the material types we use:
1. PVC: A. Advantages: The cheapest and very commen material. Veryeasy to be sealed by heat sealing machine and high frequency.
B. Disadvantage: Not environmental and nonflammable. once flambe,it will produce chloration, what will do bad to theenvironment.
2. PS: A. Advantage: Very easy to be vacuum thermoformed and it isenvironmental material. Always molded into trays, including flockytrays. Widely used in electron, medical, food, cosmetic, hardwareand so on.
B. Disadvantage: Relatively speaking, it is a bit fragile and easyto be torn off.
3. PP: A. Advantage: High melting point and can be microwaveable.Widely used in food packaging.
B. Disadvantage: Shrink material, not easy to be vacuumthermoformed; Has not passed the Halogen Free test but it is foodgrade material.
4. PET: PET has two types, one is APET, the other is PETG. Bothhave high transparency and are environmental material. APET couldnot be sealed by our machine but PETG can. PETG is the only onewhich has passed the Halogen Free test.

about our service flow:
1. Offer: Quotation will be offered after you inform us thespecification and quantity of the packaging, such as the size andmaterial you require. Or kindly send us the real sample for exactprice directly. If possible, pls advise the qty as well!
2. Design: If you have no design for the packaging, You can providethe goods or accessory to us and we can offer free drafts for youand it takes 2-3 days, or or you can draw the draft to us
3. Hand-made samples time: 2-3 days
Note: We usually make samples by hand-made Plastar molds. Theadvantage is short lead time and low cost. But the surface will bea bit rough and not so transparent as by copper molds or othermolds.
4. Bulk production lead-time: 7-10 days (QTY at 100, 000PCS)
Note: We have to make copper molds or aluminum molds in bulkproduction. The lead time of copper molds is usually 3-5 days andaluminum molds will be 1-2 days more than copper molds. The cost ofcopper molds is affordable but aluminum molds cost will be muchhigher. It always used for high precision products or very largeorder qty products. Of course the quality produced by aluminummolds will be better than copper molds. The transparency also willbe higher.
5. Price terms: FOB Shenzhen
Or EXW DongGuan
6. Terms of payment: T/T(30% 70%), LC100% At sight, Paypal, WesternUnion