Cost

(EXW)

 USD

  We`d like to assist tohandle the export and to deliver the goods to Tianjin Xingang, Thebuyer pay us for all the charges.

RMB

The Main TechnicalParameters of The Pipe Bending Machine

1. Mastercylinder:  inside diameter:φ250mm  diameter of therod: φ210mm

effective strock:12m  themax thrust of the 2 cylinders 210T.

The other smallercylinders: φ125mm  2 pieces.

2. Hydraulic pumpstation

   a.stationconfiguration:   25scy plunger pump 1 set. 7.5KW Motor  1 set ( to conversefrequency

adjust the speed of the masterpump)

    PV2R13-17-116 gear pump 1 set.15KW Motor  1 set ( fast forwad andbackward,to guide clampwheel.fixture motor).

   The working speed ; 0-20cm/min , the maxmumbackward speed:300cm/min

3.The guiding part of the mainmachine is controled by four wheels, the clamp holding differentsize run

   By the hydraulic motor, it open and closeddrived by the oil cylinder, the oil cylinder drive the the rockingarm to adjust the bending radius.

4.Medium-frequency powersupply:600 KW, 500-1000HZ.

   Thetotal power of the machinery part: 25KW,380V or 220V,50HZ or 60HZ

5.Assembly parts

   a.clampwheels (four for the round pipe and fourfor the square pipe).fixture made of 45#cast steel

   b.masterfuselage.weldment.themain pushing board are welded board

  c.screw.chain.standardparts and bearing are national standards

   d.the guider isdovetail groove slide plate mode

   e,  The effective length of the bendingradius adjust device is30m(the part in the groun and the turningarm)

6.PLC(Siemens)

    Angle settingshow.distance and speed settingshow.temperatureshow.with memory storagefunction,the bending angle sensed fromthe encoder,the terminal showed by thetouch screen,During bending, computerrecords bending status at all times,Putthe angle degree via the touch screen.With the infraredthermometer. The data and image of whole process can be stored andprinted..