Brand:HANYU
MOQ:1
Quantity:10
Machine parts
Name | Brand | Original |
Blowing cylinder | FESTO | Germany |
Mould closing and opening cylinder | FESTO | Germany |
Valve | FESTO | Germany |
Revolve cylinder | SMC | Japan |
PLC | MITSUBISHI | Japan |
HMI SCRENN | WINVIEW 506L | Taiwan |
Switch | OMRON | Japan |
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of theheat by letting the bottles rotate by itself and revolute in therails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheatpreforms in shapes by adjusting the light tube and the length ofthe reflecting board in the preheating area, and eternaltemperature in the preheater with an automatic thermostaticapparatus.
E. High safeties with security automatic-locking apparatus ineach mechanical action, which will make the procedures turn into astate of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drivethe action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowingand mechanical action by dividing the blowing and action into threeparts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double cranklinks to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve tomake the air pressure diagram of the machine easier tounderstand.
K. Low cost, high efficiency, easy operation, easy maintenance,etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
Technical parameter
TYPE | ITEM | UNIT | HY-A4 technical data |
Container | Product material | / | PET |
Container volume | L | 0.05-2.0 | |
Theoretic output | Psc/hr | 4200 | |
Preform length | MM | 50-200 | |
Max height of bottle | MM | 320 | |
Molding | Preform inner diameter | mm | 15-60 |
Bottle diameter | mm | 35-110 | |
Max mold plate dimension (L × W) | mm | 380 × 460 | |
Max mold thickness | mm | 200 | |
Air compressor | High pressure compressor | M3/Mpa | 1.2/30 × 3set |
Locking force | KN | 170 | |
Mold opening stroke (adjustable) | mm | 200 | |
Low pressure compressor | M3/Mpa | 2.0/10 × 1sets | |
Air dryer | M3/Mpa | 2.0/30 × 1sets | |
Main machine electricity | Power | KW | 30 |
Voltage / frequency | V/Hz | 380/50hz | |
Machine size and weight | Main machine (L × W × H) | M | 4.2 × 1.8 × 2.0 |
Main machine weight | T | 4.2 | |
Conveyor (L × W × H) | M | 1.4 × 1.1 × 1.85 | |
Conveyor weight | T | 0.4 | |
High pressure compressor (L × W × H) | Kg | 1.90 × 0.75 × 1.50 × 3sets | |
Low pressure compressor (L × W × H) | M | 1.85 × 0.75 × 1.50 | |
High pressure air reservoir tank (D × H) | M | 0.70 × 2.25/3.0 | |
Air dryer (L × W × H) | M | 0.85 × 0.50 × 0.95 | |
Air filters | Kg | 10 × 5pc | |
Cooling water: cooling water recycling system canbe used with its power of 8~10 liter per minute and 2~3 kilos waterpressure | |||
Total power: 51.9 high pressure air volume(1m/min); low pressure air volume (1.2m/min) | |||
Safety | Auto emergency alarm | Safety inter-locking device | |
Should any of other items be of interest to you, please let meknow. I will be happy to give you quotations upon receipt of yourdetailed requirements.Thanks very much for your attention.
bottle molding machine
