Brand:HY
MOQ:10
Quantity:2
Main Features:
1) Good compatibility: It can be applicable to 40W and 60W lasertubes.
2) Cutting Type and Sculpting Type: The cutting type has a goodpower stability and strong adaptability; while the sculpting typehas a quick response speed and good engraving effect.
3) Dramatically lengthen the life of laser.
4) Easy Control: The start and stop of laser can be easilycontrolled by TTL level. And there are protection switch to testthe external water, ventilation, etc.
5) Easy control of laser power: Both 0-5V analog signal and PWMsignal can control the laser power.
6) The power supply has open circuit protection: Under thecondition of good protective earthing, the power supply can work inopen-circuit for a short time, which could avoid the damage oflaser power supply because of the bursting of laser tube, therebyenhancing the life of power supply.
7) The power supply can take feedback interface which can beused in closed-loop control and testing the working current oflaser.
8) The power supply adds a new function, that is timely scenejudging which part is damaged, laser tube or laser power.
9) Application: Acrylic sculpture, cut; fabric sculpture, cut;rubber sheet sculpture, cut, etc.
2. Specification
Input | Input Voltage | AC220V or AC110V(to be specified when placing order) | |
AC frequency | 47—440HZ | ||
Cold Surge Current | ≤60A(AC220V Input) | ≤30A(AC110 Input) | |
Current Leakage | ≤0.7mA(AC220V Input) | ≤0.4mA(AC110V Input) | |
Output | Maximum Input Voltage | DC 35KV | |
Maximum Output Current | DC 23mA | ||
Efficiency | ≥90percent (full load) | ||
Mean Time Between Failure (MTBF) | ≥10000H | ||
Response Speed | ≤1ms(from the switch Signal is given to the output current up to90 percent of the setting current) | ||
Control Interface | TTL level switch control; high or low effective level can bechosen (details refer to the control terminalspecification) | ||
Withstand Voltage | Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative isconnected with machine shell. | ||
Protection | can work in open-circuit condition for a short time(Require agood protective earthing and avoid arc between the positive and themachine shell) | ||
Environment | Operating Temperature,-10~40°C,Relative Humidity(RH)≤90percent | ||
Cooling Way | Force-Air Cooling (FAC) | ||
Dimension | L×W×H=207*144*97(mm) | ||
60 W CO2 laser power supply
