Brand:Tongjia
MOQ:1
Send Inquiry
- Double-cylinder balance injection system
- Multi-stage pressure & speed injection
- Back-pressure adjustment device
- Decompression
- Low pressure mold protection
- Multiple hydraulic ejector knock-out
- Lubrication system
- Hydraulic pressure full proportional control
- Molding data memory system
- All computer control system
Item | Model | Unit | JG-SZ5000 |
Injection Unit | Screw diameter | mm | 85 |
Screw L/D ratio | L/D | 18.8 | |
Injection volume | cm3 | 2218 | |
Injection weight | g | 2000 | |
Injection pressure | Mpa | 149 | |
Clamping Unit | Clamping force | KN | 5000 |
Opening stroke | mm | 725 | |
Space between tie-bars | mm | 800*710 | |
Max. mould height | mm | 720 | |
Min. mould height | mm | 350 | |
Ejector stroke | mm | 175 | |
Hydraulic ejection | KN | 151 | |
General | Pump pressure | Mpa | 16 |
Motor power (approx) | KW | 45 | |
Heater power | KW | 27.5 | |
Dimensions (L×W×H) | m | 8.0*2.1*2.6 | |
Machine weight (approx) | T | 18 |
